Datasheet4U Logo Datasheet4U.com

MAX3421E - USB Peripheral/Host Controller

Description

The MAX3421E USB peripheral/host controller contains the digital logic and analog circuitry necessary to implement a full-speed USB peripheral or a full-/lowspeed host compliant to USB specification rev 2.0.

Features

  • ±15kV ESD protection and programmable USB connect and disconnect. An internal serial interface engine (SIE) handles low-level USB protocol details such as error checking and bus retries. The MAX3421E operates using a register set accessed by an SPI interface that operates up to 26MHz. Any SPI master (microprocessor, ASIC, DSP, etc. ) can add USB peripheral or host functionality using the simple 3- or 4wire SPI interface. The MAX3421E makes the vast collection of USB peripherals available to any m.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
MAX3408 75/100/120 Switchable Termination Networks Maxim
MAX3430 80V Fault-Protected / Fail-Safe / 1/4-Unit Load / #.3V RS-485 Transceiver Maxim
MAX34408 SMBus Dual/Quad Current Monitor Maxim Integrated
MAX34409 SMBus Dual/Quad Current Monitor Maxim Integrated
MAX3440E 15kV ESD-Protected / 60V Fault-Protected / 10Mbps / Fail-Safe RS-485/J1708 Transceivers Maxim

Other Datasheets by Maxim Integrated (Analog Devices)

Part Number Description
MAX3420E USB Peripheral Controller
MAX3406 (MAX3406 - MAX3408) Switchable Termination Networks
MAX3407 (MAX3406 - MAX3408) Switchable Termination Networks
MAX341 (MAX341 - MAX348) CMOS / DMOS Analog Switches
MAX343 (MAX341 - MAX348) CMOS / DMOS Analog Switches

Full PDF Text Transcription

Click to expand full text
EVALUATION KIT AVAILABLE MAX3421E USB Peripheral/Host Controller with SPI Interface General Description The MAX3421E USB peripheral/host controller contains the digital logic and analog circuitry necessary to implement a full-speed USB peripheral or a full-/lowspeed host compliant to USB specification rev 2.0. A built-in transceiver features ±15kV ESD protection and programmable USB connect and disconnect. An internal serial interface engine (SIE) handles low-level USB protocol details such as error checking and bus retries. The MAX3421E operates using a register set accessed by an SPI interface that operates up to 26MHz. Any SPI master (microprocessor, ASIC, DSP, etc.) can add USB peripheral or host functionality using the simple 3- or 4wire SPI interface.
Published: |