Datasheet4U Logo Datasheet4U.com

MAX2203 - RMS Power Detector

Description

The MAX2203 RMS power detector is designed to operate from 800MHz to 2.0GHz.

The device is ideal for wideband code-division multiple access (WCDMA), cdma2000®, and high-speed downlink/uplink packet access.

Features

  • o -24dBm to +3dBm Power-Detection Range MAX2203 Ordering Information PART MAX2203EWT+T10 TEMP RANGE -40°C to +85°C.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
MAX220 +5V-Powered Multichannel RS-232 Drivers/Receivers MAXIM
MAX2202 RMS Power Detector Maxim Integrated
MAX2205 RF Power Detectors Maxim
MAX2206 RF Power Detectors Maxim Integrated
MAX2207 RF Power Detectors Maxim Integrated

Other Datasheets by Maxim Integrated (Analog Devices)

Part Number Description
MAX2204 RF Power Detector
MAX2209 RF Power Detector
MAX224 +5V-Powered / Multichannel RS-232 Drivers/Receivers
MAX2010 500MHz to 1100MHz Adjustable RF Predistorter
MAX2014 75dB Logarithmic Detector/Controller

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
19-4982; Rev 0; 10/09 KIT ATION EVALU E L B A AVAIL RMS Power Detector General Description The MAX2203 RMS power detector is designed to operate from 800MHz to 2.0GHz. The device is ideal for wideband code-division multiple access (WCDMA), cdma2000®, and high-speed downlink/uplink packet access. The MAX2203 accepts an RF signal at the input and outputs the same voltage regardless of the peak-average of the input signal. The output voltage and input power is linear in dB. The device has a -24dBm to +3dBm detection range, and every dB change in input power gives 35mV (typ) change in output voltage. The MAX2203 operates from a 2.5V to 4.2V supply and is specified over the -40°C to +85°C extended temperature range. The device is available in a 6-bump WLP package.
Published: |