Datasheet4U Logo Datasheet4U.com

MAX17020 - Dual Quick-PWM Step-Down Controller

Description

The MAX17020 is a dual Quick-PWM™ step-down power-supply (SMPS) controller with synchronous rectification, intended for main 5V/3.3V or I/O 1.5V/1.05V power generation in battery-powered systems.

Features

  • this current limit ensures robust output supplies. The 5V/3.3V or 1.5V/1.05V SMPS outputs can save power by operating in pulse-skipping mode or in ultrasonic mode to avoid audible noise. Ultrasonic mode forces the controller to maintain switching frequencies greater than 20kHz at light loads. An internal 100mA linear regulator can be used to either generate the 5V bias needed for power-up or other lower power “always-on” suspend supplies. An independent bypass input allows automatic bypassing o.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
MAX17024 Single Quick-PWM Step-Down Controller Maxim Integrated
MAX1702B Triple-Output Power-Management IC Maxim
MAX170 Serial Output 5.6us 12-Bit A/D Converter Maxim
MAX1700 Step-Up DC-DC Converters Maxim
MAX17000 Complete DDR2 and DDR3 Memory Power-Management Solution Maxim Integrated

Other Datasheets by Maxim Integrated (Analog Devices)

Part Number Description
MAX17021 (MAX17021 - MAX17482) Quick-PWM Controllers
MAX17000A Complete DDR2 and DDR3 Memory Power-Management
MAX17005 High-Performance Chargers
MAX17005A High-Performance Chargers
MAX17005B Highest Switching-Frequency Notebook Battery Chargers

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
19-4118; Rev 2; 2/09 KIT ATION EVALU E L B A AVAIL Dual Quick-PWM Step-Down Controller with Low-Power LDO, RTC Regulator General Description The MAX17020 is a dual Quick-PWM™ step-down power-supply (SMPS) controller with synchronous rectification, intended for main 5V/3.3V or I/O 1.5V/1.05V power generation in battery-powered systems. Lowside MOSFET sensing provides a simple low-cost, highly efficient current sense for valley current-limit protection. Combined with the output overvoltage and undervoltage protection features, this current limit ensures robust output supplies. The 5V/3.3V or 1.5V/1.05V SMPS outputs can save power by operating in pulse-skipping mode or in ultrasonic mode to avoid audible noise.
Published: |