MAX16056
Description
The MAX16056-MAX16059 are ultra-low-current 125nA (typ) microprocessor (µP) supervisory circuits that monitor a single system supply voltage. These devices assert an active-low reset signal whenever the V CC supply voltage drops below the factory-trimmed reset threshold, manual reset is pulled low, or the watchdog timer runs out (MAX16056/MAX16058).
Key Features
- The MAX16057/MAX16059 do not have the watchdog feature. The MAX16056-MAX16059 are available in either pushpull or open-drain output-type configurations (see the Ordering Information and Selector Guide). These devices are fully specified over the -40°C to +125°C automotive temperature range. The MAX16056/MAX16058 are available in the 8-pin TDFN package, and the MAX16057/ MAX16059 are available in the 6-pin TDFN package. Features o Ultra-Low 125nA (typ) Supply Current o 1.1V to 5.5V Operating Supply Range o Factory-Set Reset Threshold Options from 1.575V to 4.625V in Approximately 100mV Increments o Capacitor-Adjustable Reset Timeout o Capacitor-Adjustable Watchdog Timeout (MAX16056/MAX16058) o Watchdog Timer Capacitor Open Detect Function o Optional Watchdog Disable Function (MAX16056/MAX16058) o Manual Reset Input o Guaranteed RESET Valid for VCC ≥ 1.1V o Push-Pull or Open-Drain RESET Output Options o Power-Supply Transient Immunity o Small, 3mm x 3mm TDFN Package
