Datasheet4U Logo Datasheet4U.com

MAX15061 - 300mW Boost Converter and Current Monitor

Description

The MAX15061 consists of a constant-frequency pulsewidth modulating (PWM) step-up DC-DC converter with an internal switch and a high-side current monitor with high-speed adjustable current limiting.

Features

  • a shutdown mode to save power. The MAX15061 includes a current monitor with more than three decades of dynamic range and monitors current ranging from 500nA to 2mA with high accuracy. Resistor-adjustable current limiting protects the APD from optical power transients. A clamp diode protects the monitor’s output from overvoltage conditions. Other protection features include cycle-by-cycle current limiting of the boost converter switch, undervoltage lockout, and thermal shutdown if the die tempera.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
MAX15062 Synchronous Step-Down DC-DC Converters Maxim Integrated
MAX150 CMOS High Speed 8Bit A/D Converter with Refrence and Track/Hold Function Maxim
MAX15002 Dual-Output Buck Controller Maxim Integrated
MAX15004A 4.5V to 40V Input Automotive Flyback/Boost/SEPIC Power-Supply Controllers Maxim Integrated
MAX15004B 4.5V to 40V Input Automotive Flyback/Boost/SEPIC Power-Supply Controllers Maxim Integrated

Other Datasheets by Maxim Integrated (Analog Devices)

Part Number Description
MAX15068 Single Hot-Swap Controller
MAX15000 Current-Mode PWM Controllers
MAX15001 Current-Mode PWM Controllers
MAX15003 Triple-Output Buck Controller
MAX15004 4.5V to 40V Input Automotive Flyback/Boost/SEPIC Power-Supply Controllers

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
19-5034; Rev 0; 10/09 80V, 300mW Boost Converter and Current Monitor for APD Bias Applications General Description The MAX15061 consists of a constant-frequency pulsewidth modulating (PWM) step-up DC-DC converter with an internal switch and a high-side current monitor with high-speed adjustable current limiting. This device can generate output voltages up to 76V and provides current monitoring up to 4mA (up to 300mW). The MAX15061 can be used for a wide variety of applications such as avalanche photodiode biasing, PIN biasing, or varactor biasing, and LCD displays. The MAX15061 operates from 2.7V to 11V. The constant-frequency (400kHz), current-mode PWM architecture provides low-noise output voltage that is easy to filter.
Published: |