Datasheet4U Logo Datasheet4U.com

MAX1363 - 4-Channel 12-Bit System Monitors

General Description

The MAX1363/MAX1364 low-power, 12-bit, 4-channel analog-to-digital converters (ADCs) feature a digitally programmable window comparator with an interrupt output for automatic system-monitoring applications.

Key Features

  • a 2.048V internal reference, and the MAX1364 features a 4.096V internal reference. The MAX1363/MAX1364 are available in a 10-pin µMAX® package and are specified over the extended (-40°C to +85°C) temperature range. For 10-bit.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
MAX136 Digit A/D Converter Maxim
MAX130 3 Digit A/D Converters with Bandgap Refrence Maxim
MAX13000E Ultra-Low-Voltage Level Translators Maxim Integrated
MAX13001E Ultra-Low-Voltage Level Translators Maxim Integrated
MAX13002E Ultra-Low-Voltage Level Translators Maxim Integrated

Other Datasheets by Maxim Integrated (now Analog Devices)

Part Number Description
MAX1361 4-Channel 10-Bit System Monitors
MAX1362 4-Channel 10-Bit System Monitors
MAX1364 4-Channel 12-Bit System Monitors
MAX1365 Digit Panel Meters
MAX1367 Digit Panel Meters

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
19-3338; Rev 1; 3/05 www.DataSheet4U.com 4-Channel, 12-Bit System Monitors with Programmable Trip Window and SMBus Alert Response General Description The MAX1363/MAX1364 low-power, 12-bit, 4-channel analog-to-digital converters (ADCs) feature a digitally programmable window comparator with an interrupt output for automatic system-monitoring applications. Once configured, monitor mode automatically asserts an interrupt when any analog input exceeds the programmed upper or lower thresholds, without interaction to the host. The MAX1363/MAX1364 respond to the SMBus™ alert, allowing quick identification of the alarming device on a shared interrupt. A programmable delay between monitoring intervals lowers power consumption for reduced monitoring rates.