Datasheet4U Logo Datasheet4U.com

MAX13444E - Fail-Safe RS-485/J1708 Transceivers

Download the MAX13444E datasheet PDF. This datasheet also covers the MAX13442E variant, as both devices belong to the same fail-safe rs-485/j1708 transceivers family and are provided as variant models within a single manufacturer datasheet.

General Description

The MAX13442E/MAX13444E are fault-protected RS-485 and J1708 transceivers that feature ±80V protection from signal faults on communication bus lines.

The MAX13442E/MAX13444E feature a reduced slew-rate driver that minimizes EMI and reflections, allowing error-free transmission up to 250kbps.

Key Features

  • ±60V protection from signal faults on communication bus lines. These transceivers feature foldback current limit. Each device contains one differential line driver with three-state output and one differential line receiver with three-state input. The 1/4-unitload receiver input impedance allows up to 128 transceivers on a single bus. The devices operate from a 5V supply. True fail-safe inputs guarantee a logic-high receiver output when the receiver inputs are open, shorted, or connected to an id.

📥 Download Datasheet

Note: The manufacturer provides a single datasheet file (MAX13442E_MaximIntegratedProducts.pdf) that lists specifications for multiple related part numbers.

📁 Similar Datasheet

Part Number Description Manufacturer
MAX134 3 Digit DMM Circuit Maxim
MAX1343 Multichannel ADCs/DACs Maxim Integrated
MAX13487E Half-Duplex RS-485-Compatible Transceiver Analog Devices
MAX13488E Half-Duplex RS-485-Compatible Transceiver Analog Devices
MAX130 3 Digit A/D Converters with Bandgap Refrence Maxim

Other Datasheets by Maxim Integrated (Analog Devices)

Part Number Description
MAX13442E Fail-Safe RS-485/J1708 Transceivers
MAX13443E Fail-Safe RS-485/J1708 Transceivers
MAX13448E 80V Fault-Protected Full-Duplex RS-485 Transceiver
MAX13430E RS-485 Transceivers
MAX13431E RS-485 Transceivers

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
www.DataSheet.co.kr 19-3898; Rev 3; 3/11 ±15kV ESD-Protected, ±80V Fault-Protected, Fail-Safe RS-485/J1708 Transceivers General Description The MAX13442E/MAX13444E are fault-protected RS-485 and J1708 transceivers that feature ±80V protection from signal faults on communication bus lines. The MAX13442E/MAX13444E feature a reduced slew-rate driver that minimizes EMI and reflections, allowing error-free transmission up to 250kbps. The MAX13443E driver can transmit up to 10Mbps. The high-speed MAX13443E RS-485 tranceiver features ±60V protection from signal faults on communication bus lines. These transceivers feature foldback current limit. Each device contains one differential line driver with three-state output and one differential line receiver with three-state input.