Datasheet4U Logo Datasheet4U.com

MAX13037 - (MAX13037 / MAX13038) Automotive Contact Monitor and Level Shifters

Datasheet Summary

Description

The MAX13037/MAX13038 automotive contact monitor and level shifters monitor and debounce eight remote mechanical switches and assert an interrupt (INT) if a switch changes state.

The state of each switch is sampled through an SPI™ interface by reading the status register.

Features

  • o +6V to +26V Operating Voltage Range MAX13037/MAX13038.

📥 Download Datasheet

Datasheet preview – MAX13037

Datasheet Details

Part number MAX13037
Manufacturer Maxim Integrated Products
File Size 311.07 KB
Description (MAX13037 / MAX13038) Automotive Contact Monitor and Level Shifters
Datasheet download datasheet MAX13037 Datasheet
Additional preview pages of the MAX13037 datasheet.

📁 Similar Datasheet

  • MAX130 - 3 Digit A/D Converters with Bandgap Refrence (Maxim)
  • MAX13000E - Ultra-Low-Voltage Level Translators (Maxim Integrated)
  • MAX13001E - Ultra-Low-Voltage Level Translators (Maxim Integrated)
  • MAX13002E - Ultra-Low-Voltage Level Translators (Maxim Integrated)
  • MAX13003E - Ultra-Low-Voltage Level Translators (Maxim Integrated)
  • MAX13004E - Ultra-Low-Voltage Level Translators (Maxim Integrated)
  • MAX13005E - Ultra-Low-Voltage Level Translators (Maxim Integrated)
  • MAX1304 - 8-/4-/2-Channel / 12-Bit / Simultaneous-Sampling ADCs (Maxim)
  • MAX1305 - 8-/4-/2-Channel / 12-Bit / Simultaneous-Sampling ADCs (Maxim)
  • MAX13051 - Fault-Protected Can Transceiver (Maxim Integrated)
Other Datasheets by Maxim Integrated Products

Full PDF Text Transcription

Click to expand full text
www.DataSheet4U.com 19-1084; Rev 0; 11/07 Automotive Contact Monitor and Level Shifters with LDO Regulator General Description The MAX13037/MAX13038 automotive contact monitor and level shifters monitor and debounce eight remote mechanical switches and assert an interrupt (INT) if a switch changes state. The state of each switch is sampled through an SPI™ interface by reading the status register. Any switch can be prohibited from asserting an interrupt by writing to the command register. Four of the switch inputs are intended for ground-connected switches (IN0–IN3) and the other four inputs (IN4–IN7) are programmable in groups of two for either groundconnected or battery-connected switches.
Published: |