Datasheet4U Logo Datasheet4U.com

DS3100 - Stratum 3/3E Timing Card-IC

Description

When paired with an external TCXO or OCXO, the DS3100 is a complete central timing and synchronization solution for SONET/SDH network elements.

Features

  • Synchronization Subsystem for Stratum 3E, 3, 4E and 4, SMC and SEC - Meets Requirements of GR-1244 Stratum 3/3E, GR-253, G.812 Types I, III and IV, and G.813 - Stratum 3E Holdover Accuracy with Suitable External Oscillator - Programmable Bandwidth, 0.5mHz to 70Hz - Hitless Reference Switching on Loss of Input - Phase Build-Out and Transient Absorption - Locks to and Generates 125MHz for Gigabit Synchronous Ethernet per ITU-T G.8261 14 Input Clocks - 10 CMOS/TTL Inputs Accept 2kHz, 4kHz, and Any.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
DS3100 Stratum 2/3E/3 Timing Card-IC Microsemi
DS3101 Stratum 3/3E Timing Card IC Dallas Semiconductor
DS310W Surface Mount Schottky Barrier Rectifier SEMIPOWER
DS310W SCHOTTKY BARRIER RECTIFIER AiT Components
DS310W SURFACE MOUNT SCHOTTKY BARRIER RECTIFIER Rectron

Other Datasheets by Maxim Integrated (Analog Devices)

Part Number Description
DS3104-SE Line Card Timing IC
DS3105 Line Card Timing IC
DS31400 Dual DPLL Timing IC
DS31404 Dual DPLL Timing IC
DS31406 Single DPLL Timing IC

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
www.DataSheet4U.com DS3100 Stratum 3/3E Timing Card IC www.maxim-ic.com GENERAL DESCRIPTION When paired with an external TCXO or OCXO, the DS3100 is a complete central timing and synchronization solution for SONET/SDH network elements. With two multiprotocol BITS/SSU receivers and 14 input clocks, the device directly accepts both external timing and line timing from a large number of line cards. All input clocks are continuously monitored for frequency accuracy and activity. Any two of the input clocks can be selected as the references for the two core DPLLs. The T0 DPLL complies with the Stratum 3 and 3E requirements of GR1244, GR-253, and the requirements of G.812 Type III and G.813.
Published: |