DS2741 - Current Monitor and Accumulator

Name: DS2741
SKU: DS2741-673180

Maxim Integrated Products

📥 Download Datasheet

DS2741 Datasheet Preview — Preview of DS2741 PDF

Datasheet Details

Part number	DS2741
Manufacturer	Maxim Integrated Products
File Size	214.59 KB
Description	Current Monitor and Accumulator
Datasheet	DS2741_MaximIntegratedProducts.pdf

DS2741 Product details

Description

The DS2741 current monitor/accumulator is a complete current-sensing, measuring, and accumulation device tailored for cost-sensitive, battery-powered applications in a small 3mm x 3mm TDFN package.

Features

Complete, Low-Cost, Integrated Current-Sensing and Accumulation Solution with Serial Digital Output.
On-Board 38mΩ Sense Resistor.
Current Measurement: Signed 10-Bit Bidirectional Measurement ±2.5A Dynamic Range 1% Error at +25°C 2% Error Over Temperature.
Current Accumulation: 0.247mAhr LSB ±8.1Ahrs Full-Scale Range.
Industry-Standard I2C Interface with FactoryProgrammable Slave Address.
2.5V to 4.5V Single-Supply Operation.
Low-Po.

📁 DS2741 Similar Datasheet

DS2740 - High-Precision Coulomb Counter (Maxim Integrated)
DS2746 - Low-Cost 2-Wire Battery Monitor (Manix)
DS2703 - SHA-1 Battery Pack Authentication IC (Dallas Semiconductor)
DS2710 - Single-Cell NiMH Charger (Maxim)
DS2715 - NiMH Battery Pack Charge Controller (Dallas Semiconducotr)
DS2720 - Efficient/ Addressable Single-Cell Rechargeable Lithium Protection IC (Dallas Semiconducotr)
DS2726 - 5-Cell to 10-Cell Li+ Protector (Maxim Integrated)
DS2731 - Cache-Memory Battery-Backup Management (Maxim)

Other Datasheets by Maxim Integrated Products

DS2745 - Low-Cost I2C Battery Monitor
DS2704 - 1280-Bit EEPROM
DS2705 - SHA-1 Authentication Master
DS2711 - (DS2711 / DS2712) Loose Cell NiMH Chargers
DS2712 - (DS2711 / DS2712) Loose Cell NiMH Chargers
DS2714 - Quad Loose Cell NiMH Charger

Published: May 1, 2010 |