Datasheet4U Logo Datasheet4U.com

MAXM22510 - RS-485/RS-422 Module Transceiver + Power

General Description

The MAXM22510 and MAXM22511 isolated RS-485/ RS-422, full-duplex, transceiver modules provide 2500VRMS (60s) of galvanic isolation between the cableside (RS-485/RS-422 driver/receiver side) and the UARTside of the device.

An integrated DC-DC powers the cable-side of the module.

Key Features

  • Space Saving Solution.
  • Fully Integrated Module for Compact Design.
  • High-Performance Transceiver Enables Flexible Designs.
  • Integrated DC-DC for Cable-Side Power.
  • Compliant with RS-485 EIA/TIA-485 Standard.
  • 500kbps Maximum Data Rate for the MAXM22510.
  • 25Mbps Maximum Data Rate for the MAXM22511.
  • Allows Up to 128 Devices on the Bus.
  • Integrated Protection Ensures for Robust Communication.
  • ±35kV ESD (HBM) on.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
MAXM86161 Single-Supply Integrated Optical Module Analog Devices
MAx-305 Two-Position Actuators General Instructions Schneider
MAX-422 HIGH CURRENT TRANSIENT VOLTAGE SUPPRESSOR ETC
MAX-6 u-blox 6 GLONASS / GPS & QZSS modules ublox
MAX-6G u-blox 6 GLONASS / GPS & QZSS modules ublox

Other Datasheets by Maxim Integrated (now Analog Devices)

Part Number Description
MAXM22511 RS-485/RS-422 Module Transceiver + Power
MAXM15462 300mA Himalaya uSLIC Step-Down Power Module
MAXM17503 DC-DC Step-Down Power Module
MAXM17514 High-Efficiency Power Module
MAXM17516 High-Efficiency Power-Module

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
EVALUATION KIT AVAILABLE Click here for production status of specific part numbers. MAXM22510/MAXM22511 2.5kVRMS Complete Isolated RS-485/RS-422 Module Transceiver + Power General Description The MAXM22510 and MAXM22511 isolated RS-485/ RS-422, full-duplex, transceiver modules provide 2500VRMS (60s) of galvanic isolation between the cableside (RS-485/RS-422 driver/receiver side) and the UARTside of the device. An integrated DC-DC powers the cable-side of the module. No external components are required. Isolation improves communication by breaking ground loops and reduces noise when there are large differences in ground potential between ports. These devices allow for robust communication up to 500kbps (MAXM22510) and 25Mbps (MAXM22511). The MAXM22510/MAXM22511 operate from a single 3.