Datasheet4U Logo Datasheet4U.com

MAX9509 Datasheet Directdrive Video Filter Amplifiers

Manufacturer: Maxim Integrated (now Analog Devices)

Overview: MAX9509/MAX9510 EVALUATION KIT AVAILABLE 1.8V, Ultra-Low Power, DirectDrive Video Filter Amplifiers.

General Description

Operating from a 1.8V single power supply, the MAX9509/ MAX9510 amplify standard-definition video signals and only consume 5.8mW quiescent power and 11.7mW average power.

The MAX9509/MAX9510 leverage Maxim’s DirectDrive® technology to generate a clean, internal negative supply.

bining the internal negative power supply with the external positive 1.8V supply, the MAX9509/ MAX9510 are able to drive a 2VP-P video signal into a 150Ω load.

Key Features

  • an internal reconstruction filter that smoothes the steps and reduces the spikes on the video signal from the video digital-to-analog converter (DAC). The reconstruction filter typically has ±1dB passband flatness of 8.1MHz and 46dB attenuation at 27MHz. The large-signal, ±1dB passband flatness of the MAX9510 video amplifier is typically 8.4MHz, and the large signal -3dB frequency is typically 11.4MHz. The input of the MAX9509/MAX9510 can be directly connected to the output of a video DAC. The M.

More Datasheets from Maxim Integrated (now Analog Devices)

Part Number Description
MAX9510 DirectDrive Video Filter Amplifiers
MAX900 Low-Power Voltage Comparators
MAX9000 Single-Supply Op Amp + Comparator
MAX9001 Single-Supply Op Amp + Comparator
MAX9002 Single-Supply Op Amp + Comparator
MAX9003 Single-Supply Op Amp + Comparator
MAX9004 Single-Supply Op Amp + Comparator
MAX9005 Single-Supply Op Amp + Comparator
MAX901 Low-Power Voltage Comparators
MAX9010 Precision TTL Comparators

MAX9509 Distributor