Datasheet4U Logo Datasheet4U.com

MAX9101 - +1.0V Micropower SOT23 Comparators

This page provides the datasheet information for the MAX9101, a member of the MAX9100 +1.0V Micropower SOT23 Comparators family.

Description

The MAX9100/MAX9101 micropower comparators are optimized for single-cell systems, and are fully specified for operation from a single supply of 1.0V to 5.5V.

Features

  • a push-pull CMOS output stage that sinks and sources current with large internal output drivers that allow rail-to-rail output swings with loads up to 5mA. The MAX9101 has an open-drain output stage that makes it suitable for mixed-voltage designs. The MAX9100/MAX9101 are available in tiny SOT23-5 packages. _______________.

📥 Download Datasheet

Datasheet preview – MAX9101

Datasheet Details

Part number MAX9101
Manufacturer Maxim Integrated
File Size 182.80 KB
Description +1.0V Micropower SOT23 Comparators
Datasheet download datasheet MAX9101 Datasheet
Additional preview pages of the MAX9101 datasheet.

📁 Similar Datasheet

  • MAX910 - (MAX910 / MAX911) High SPeed Threshold Programmable Voltage Comparators (Maxim Integrated Products)
  • MAX9100 - +1.0V Micropower SOT23 Comparators (Maxim)
  • MAX9107 - 25ns / Dual/Quad/Single / Low-Power / TTL Comparators (Maxim)
  • MAX9108 - 25ns / Dual/Quad/Single / Low-Power / TTL Comparators (Maxim)
  • MAX9109 - 25ns / Dual/Quad/Single / Low-Power / TTL Comparators (Maxim)
  • MAX911 - (MAX910 / MAX911) High SPeed Threshold Programmable Voltage Comparators (Maxim Integrated Products)
  • MAX9110 - Single/Dual LVDS Line Drivers with Ultra-Low Pulse Skew in SOT23 (Maxim)
  • MAX9111 - Single/Dual LVDS Line Receivers (Maxim)
  • MAX9112 - Single/Dual LVDS Line Drivers with Ultra-Low Pulse Skew in SOT23 (Maxim)
  • MAX9113 - Single/Dual LVDS Line Receivers (Maxim)
Other Datasheets by Maxim Integrated
  • MAX9118 - Beyond-the-Rails Comparators With/Without Reference
  • MAX9119 - Beyond-the-Rails Comparators With/Without Reference
  • MAX9120 - Beyond-the-Rails Comparators With/Without Reference
  • MAX9126 - Quad LVDS Line Receivers
  • MAX9154 - 10-Port LVDS Repeaters
  • MAX9170 - 4-Port LVDS and LVTTL-to-LVDS Repeaters
  • MAX900 - Low-Power Voltage Comparators
  • MAX9000 - Single-Supply Op Amp + Comparator

Full PDF Text Transcription

Click to expand full text
19-1808; Rev 1; 1/07 +1.0V Micropower SOT23 Comparators MAX9100/MAX9101 General Description The MAX9100/MAX9101 micropower comparators are optimized for single-cell systems, and are fully specified for operation from a single supply of 1.0V to 5.5V. This ultra-low voltage operation, 5µA quiescent current consumption, and small footprint make the MAX9100/MAX9101 ideal for use in battery-powered systems. A wide-input common-mode range that includes the negative rail and rail-to-rail output swing allows almost all of the power supply to be used for signal voltage. In addition, propagation delay is less than 4µs, and rise and fall times are 100ns.
Published: |