Datasheet4U Logo Datasheet4U.com

MAX77714 - Complete System PMIC / Featuring 13 Regulators / 8 GPIOs / RTC and Flexible Power Sequencing

General Description

The MAX77714 is a complete power-management IC (PMIC) for portable devices using System-on-Chip (SoC) applications processors.

Two 2A (SD2/3), one 3A (SD1), and one 4A (SD0) stepdown regulator switch at 2MHz, allowing the use of small magnetic components.

Key Features

  • a programmable active-discharge circuit in shutdown. All LDOs feature two soft-start rates to limit inrush current during start up. Eight programmable GPIOs can be p.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
MAX777 Setp up DC-DC Converters Maxim
MAX77785 3.5A 1-Cell Li+ Battery Charger Analog Devices
MAX77786 5.5A 1-Cell Li+ Battery Charger Analog Devices
MAX777L Low-Voltage Input / 3V/3.3V/5V/ Adjustable Output / Step-Up DC-DC Converters Maxim
MAX770 5V/12V/15V or Adjustable / High-Efficiency / Low IQ / Step-Up DC-DC Controllers Maxim

Other Datasheets by Maxim Integrated (Analog Devices)

Part Number Description
MAX77734 Ultra-Low Power Tiny PMIC
MAX77752 Multichannel Integrated Power Management IC
MAX77756 500mA Buck Regulator
MAX77178 High-Bandwidth LTE/WCDMA PA Power Management
MAX77179 High-Bandwidth LTE/WCDMA PA Power Management

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
EVALUATION KIT AVAILABLE Click here for production status of specific part numbers. MAX77714 Complete System PMIC, Featuring 13 Regulators, 8 GPIOs, RTC, and Flexible Power Sequencing for Multicore Applications General Description The MAX77714 is a complete power-management IC (PMIC) for portable devices using System-on-Chip (SoC) applications processors. Two 2A (SD2/3), one 3A (SD1), and one 4A (SD0) stepdown regulator switch at 2MHz, allowing the use of small magnetic components. The output voltages for SD0 and SD1 are programmable from 0.26V to 1.52V in 10mV steps. The output voltage for SD2 is programmable from 0.6V to 2.194V in 6.5mV steps. The output voltage for SD3 is programmable from 0.6V to 3.78V in 12.5mV steps.