MAX7419 Datasheet | Maxim Integrated

19-1821; Rev 0; 11/00 MAX7418- MAX7425 5th-Order, Lowpass, Switched-Capacitor Filters General Description The MAX7418- MAX7425 5th-order, low-pass, switchedcapacitor filters (SCFs) operate from a single +5V (MAX7418- MAX7421) or +3V (MAX7422- MAX7425) supply. These devices draw only 3m A of supply current and allow corner frequencies from 1Hz to 45k Hz, making them ideal for low-power post-DAC filtering and antialiasing applications. They feature a shutdown mode that reduces supply current to 0.2µA. Two clocking options are available: self-clocking (through the use of an external capacitor), or external clocking for tighter corner-frequency control. An offset adjust pin allows for adjustment of the DC output level. The MAX7418/MAX7422 deliver 53d B of stopband rejection and a sharp rolloff with a 1.6 transition ratio. The MAX7421/MAX7425 achieve a sharper rolloff with a 1.25 transition ratio while still providing 37d B of stopband rejection. The MAX7419/MAX7423 Bessel filters provide low overshoot and fast settling, and the MAX7420/MAX7424 Butterworth filters provide a maximally flat passband response. Their fixed response simplifies the design task of selecting a clock frequency. Applications ADC Anti-Aliasing DAC Postfiltering CT2 Base Stations Speech Processing Selector Guide PART FILTER RESPONSE OPERATING VOLTAGE (V) MAX7418 r = 1.6 +5 Bessel +5 MAX7420 Butterworth +5 MAX7421 r = 1.25 +5 Selector Guide continued at end of data sheet. Pin Configuration TOP VIEW 1 IN 2 GND 3 VDD 4 MAX7418- MAX7425 8 CLK 7 SHDN 6 OS 5...