MAX66300 Datasheet | Maxim Integrated

Description Deep Cover® embedded security solutions cloak sensitive data under multiple layers of advanced physical security to provide the most secure key storage possible. The Deep Cover Secure Authenticator (MAX66300) bines a highly integrated RFID reader for contactless munication at 13.56MHz and a SHA-256 secure authenticator coprocessor. The RFID IC reader covers both the ISO 14443 Type A and the ISO 15693 standard. The authenticator coprocessor’s engine is based on the FIPS 180-4 standard and supports secure challenge-andresponse authentication when paired with peripherals such as the Maxim MAX66240/MAX66242 family of tag solutions. An embedded host processor can easily interface with the MAX66300 using its UART or SPI interface. Applications - - Secure Access Control - - Asset-Tracking Readers - - Authentication of Consumables - Readers in Printers (Ink Cartridge) - Blood Glucose Meters/Monitors - - Handheld Reader Modules Features and Benefits - - Secure, Contactless Host Authenticator - ISO/IEC 15693 and 14443 Type A Standard pliant - SHA-256 Engine to Run a Symmetric Key-Based Bidirectional Secure Authentication - Four 32-Byte Pages of User Memory - Four Master Secrets with Multiple Programmable Protection Options - 76-Byte Scratchpad in SRAM - True Hardware Random-Number Generator - Unique 64-Bit Serial Number - - Design Flexibility Supports Diverse Applications - UART and SPI Interface Ports - Power-Down Mode by an Input Pin (Low, Standby Power) - Antenna Short-Circuit Protection - patible with 3.3V or 5V Supply Voltages - ±2k V HBM ESD Protection - - Scalable 13.56MHz Analog Front-End Provides Support for Multiple Antenna Configurations - Single- or Double-Antenna Driver Using On-Off Keying (OOK) Modulation - User-Selectable ASK Uplink Modulations Index Adjustable from 7% Up to 30% - High-Output RF Power of Up to 200m W - Multiple Receiver Inputs for High-munication Reliability - Built-In Receiver Lowpass-Filter Cutoff Frequencies Selectable...