Datasheet4U Logo Datasheet4U.com

MAX5014 - Current-Mode PWM Controllers

General Description

The MAX5014/MAX5015 integrate all the building blocks necessary for implementing DC-DC fixed-frequency isolated power supplies.

These devices are current-mode controllers with an integrated high-voltage startup circuit suitable for isolated telecom/industrial voltage range power supplies.

Key Features

  • o Wide Input Range: (18V to 110V) or (13V to 36V) o Current-Mode Control o Leading-Edge Blanking o Internally Trimmed 275kHz ±10% Oscillator o Low External Component Count o Soft-Start o High-Voltage Startup Circuit o Pulse-by-Pulse Current Limiting o Thermal Shutdown o SO-8 Package Ordering Information PART TEMP. RANGE MAX5014CSA.
  • 0°C to +70°C MAX5014ESA.
  • -40°C to +85°C MAX5015CSA.
  • 0°C to +70°C MAX5015ESA.
  • -40°C to +85°C.
  • See Selector Guide at end of data sheet.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
MAX501 Voltage-Output / 12-Bit Multiplying DACs Maxim
MAX5012 12-Bit / 100Msps ECL DAC Maxim
MAX5013 12-Bit / 100Msps TTL DAC Maxim
MAX5018 8-Bit / High-Speed DAC Maxim
MAX5019 Current-Mode PWM Controllers with Integrated Startup Circuit Maxim

Other Datasheets by Maxim Integrated (Analog Devices)

Part Number Description
MAX5015 Current-Mode PWM Controllers
MAX5033 MAXPower Step-Down DC-DC Converter
MAX5041 Dual-Phase / Parallelable / Average Current-Mode Controllers
MAX5041A Dual-Phase / Parallelable / Average-Current-Mode Controllers
MAX5042 Two-Switch Power-IC

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
MAX5014/MAX5015 19-2082; Rev 0; 7/01 EVAALVUAAILTAIOBNLEKIT Current-Mode PWM Controllers with Integrated Startup Circuit for Isolated Power Supplies General Description The MAX5014/MAX5015 integrate all the building blocks necessary for implementing DC-DC fixed-frequency isolated power supplies. These devices are current-mode controllers with an integrated high-voltage startup circuit suitable for isolated telecom/industrial voltage range power supplies. Current-mode control with leading-edge blanking simplifies control-loop design and internal ramp compensation circuitry stabilizes the current loop when operating at duty cycles above 50% (MAX5014).