Datasheet4U Logo Datasheet4U.com

MAX4834 - 250mA LDO Linear Regulators

Description

The MAX4834/MAX4835 family of low-dropout (LDO) linear regulators feature an accurate current-limiting switch with an integrated FLAG or RESET function.

These devices operate from 2.5V to 5.5V and deliver up to 250mA of load current at a preset output voltage.

Features

  • include a low 90µA quiescent current, a 0.1µA shutdown current. The MAX4834/MAX4835 are available in space-saving 6-pin SOT23 and TDFN packages. Each device is specified over the -40°C to +85°C extended temperature range. Contact factory for other programmed output voltage versions from 1.5V to 3.3V in 100mV increments. For pin-compatible 100mA versions of this device, refer to the MAX4832/MAX4833. For pin-compatible 500mA versions of this device, refer to the MAX4836/MAX4837.

📥 Download Datasheet

Datasheet preview – MAX4834

📁 Similar Datasheet

  • MAX483 - Overvoltage Protection Controllers with Status FLAG (Maxim)
  • MAX4830 - (MAX4826 - MAX4831) 50mA/100mA Current-Limit Switches (Maxim Integrated Products)
  • MAX4831 - (MAX4826 - MAX4831) 50mA/100mA Current-Limit Switches (Maxim Integrated Products)
  • MAX4838 - Overvoltage Protection Controllers (Maxim)
  • MAX4839 - Overvoltage Protection Controllers (Maxim)
  • MAX480 - High-Precision / Low-Voltage / Micropower Op Amp (Maxim)
  • MAX4800 - (MAX4800 - MAX4802) High-Voltage Analog Switches (Maxim Integrated Products)
  • MAX4801 - (MAX4800 - MAX4802) High-Voltage Analog Switches (Maxim Integrated Products)
  • MAX4802 - (MAX4800 - MAX4802) High-Voltage Analog Switches (Maxim Integrated Products)
  • MAX481 - Low-Power / Slew-Rate-Limited RS-485/RS-422 Transceivers (Maxim)
Other Datasheets by Maxim Integrated
  • MAX4835 - 250mA LDO Linear Regulators
  • MAX483E - RS-485/RS-422 Transceivers
  • MAX4805 - Low-Noise Operational Amplifiers
  • MAX4805A - Low-Noise Operational Amplifiers
  • MAX4842 - Overvoltage Protection Controllers
  • MAX4851H - Quad SPST Switches
  • MAX4853H - Quad SPST Switches
  • MAX485E - RS-485/RS-422 Transceivers

Full PDF Text Transcription

Click to expand full text
MAX4834/MAX4835 250mA LDO Linear Regulators with Current-Limiting Switch General Description The MAX4834/MAX4835 family of low-dropout (LDO) linear regulators feature an accurate current-limiting switch with an integrated FLAG or RESET function. These devices operate from 2.5V to 5.5V and deliver up to 250mA of load current at a preset output voltage. Preset output voltage levels are 1.8V/2.5V/2.8V/3.0V/3.3V. The MAX4834/MAX4835 offer a programmable soft-start control function to eliminate false reset during startup. The MAX4834 provides a FLAG function to notify the system when the load current exceeds the limit. The MAX4835 provides a RESET function to notify the system when the output drops below the threshold.
Published: |