Datasheet4U Logo Datasheet4U.com

MAX4709 - Single 8-to-1 / Dual 4-to-1 Multiplexers

Download the MAX4709 datasheet PDF. This datasheet also covers the MAX4708 variant, as both devices belong to the same single 8-to-1 / dual 4-to-1 multiplexers family and are provided as variant models within a single manufacturer datasheet.

Description

The MAX4708/MAX4709 8-to-1 and dual 4-to-1 fault-protected multiplexers are pin compatible with the industrystandard DG508/DG509.

The MAX4708/MAX4709 are similar to the MAX4508/MAX4509, but these devices do not have clamp diodes to the supply rails on the switch outputs.

📥 Download Datasheet

Note: The manufacturer provides a single datasheet file (MAX4708-MaximIntegrated.pdf) that lists specifications for multiple related part numbers.

📁 Similar Datasheet

Part Number Description Manufacturer
MAX470 Two-Channel / Triple/Quad RGB Video Switches and Buffers Maxim
MAX4700 1.25 / Dual SPST / CMOS Analog Switches Maxim
MAX4701 (MAX4699 - MAX4702) Dual DPDT/Quad SPDT Analog Switches Maxim Integrated Products
MAX4702 (MAX4699 - MAX4702) Dual DPDT/Quad SPDT Analog Switches Maxim Integrated Products
MAX4704 4:1 Analog Multiplexer Maxim Integrated Products

Other Datasheets by Maxim Integrated (Analog Devices)

Part Number Description
MAX4708 Single 8-to-1 / Dual 4-to-1 Multiplexers
MAX4711 Quad SPST Analog Switches
MAX4712 Quad SPST Analog Switches
MAX4713 Quad SPST Analog Switches
MAX4716 Single-Supply SPST Analog Switches

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
19-4804; Rev 1; 12/08 MAX4708/MAX4709 Fault-Protected, Single 8-to-1/ Dual 4-to-1 Multiplexers General Description The MAX4708/MAX4709 8-to-1 and dual 4-to-1 fault-protected multiplexers are pin compatible with the industrystandard DG508/DG509. The MAX4708/MAX4709 are similar to the MAX4508/MAX4509, but these devices do not have clamp diodes to the supply rails on the switch outputs. These multiplexers feature fault-protected inputs, rail-to-rail signal-handling capability, and do not require power-supply sequencing. Both devices offer ±40V overvoltage protection with the supplies off, ±36V protection with the supplies on, and feature 400Ω (max) on-resistance with 15Ω (max) matching between channels. The MAX4708/MAX4709 operate with dual supplies of ±4.
Published: |