Datasheet4U Logo Datasheet4U.com

MAX4610 - SPST CMOS Analog Switches

Description

The MAX4610/MAX4611/MAX4612 are quad, low-voltage, single-pole/single-throw (SPST) analog switches.

On-resistance (100Ω, max) is matched between switches to 4Ω, max and is flat (4Ω, max) over the specified signal range.

Each switch handles V+ to GND analog signal levels.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
MAX4613 Quad / SPST Analog Switch Maxim
MAX4614 Low-Voltage / High-Speed / Quad / SPST CMOS Analog Switches Maxim
MAX4615 Low-Voltage / High-Speed / Quad / SPST CMOS Analog Switches Maxim
MAX4616 Low-Voltage / High-Speed / Quad / SPST CMOS Analog Switches Maxim
MAX4617 CMOS Analog Multiplexers/Switches Analog Devices

Other Datasheets by Maxim Integrated (Analog Devices)

Part Number Description
MAX4611 SPST CMOS Analog Switches
MAX4612 SPST CMOS Analog Switches
MAX4617 CMOS Analog Multiplexers/Switches
MAX4618 CMOS Analog Multiplexers/Switches
MAX4619 CMOS Analog Multiplexers/Switches

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
19-4793; Rev 6; 5/09 MAX4610/MAX4611/MAX4612 Low-Voltage, Quad, SPST CMOS Analog Switches General Description The MAX4610/MAX4611/MAX4612 are quad, low-voltage, single-pole/single-throw (SPST) analog switches. On-resistance (100Ω, max) is matched between switches to 4Ω, max and is flat (4Ω, max) over the specified signal range. Each switch handles V+ to GND analog signal levels. Maximum off-leakage current is only 1nA at TA = +25°C and 2nA at TA = +85°C. The MAX4610 has four normally open (NO) switches, and the MAX4611 has four normally closed (NC) switches. The MAX4612 has two NO switches and two NC switches. These CMOS switches operate from a single +2V to +12V supply. All digital inputs have +0.8V and +2.
Published: |