Datasheet4U Logo Datasheet4U.com

MAX4353 - Single-Supply Op Amps

Description

The MAX4452/MAX4352 single, MAX4453/MAX4353 dual, and MAX4454/MAX4354 quad amplifiers combine high-speed performance with ultra-low power consumption.

Features

  • o Ultra-Low 620µA Supply Current o High Speed (MAX4452/MAX4453/MAX4454) 200MHz -3dB Bandwidth 30MHz 0.1dB Gain Flatness 95V/µs Slew Rate o High Speed (MAX4352/MAX4353/MAX4354) 80MHz -3dB Bandwidth 4MHz 0.1dB Gain Flatness 240V/µs Slew Rate o Single +3V/+5V Operation o Rail-to-Rail Outputs o Ultra-Small SC70-5, SOT23-5, SOT23-8 and Thin SOT23-8 Packages Ordering Information PART TEMP RANGE PIN-.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
MAX435 Wideband Trasconductance Amplifiers Maxim
MAX4352 Single-Supply Op Amps Maxim
MAX4355 16x16 Nonblocking Video Crosspoint Switch Maxim Integrated Products
MAX4357 32 X 16 Nonblocking Video Crosspoint Switch Maxim Integrated Products
MAX4358 32 x 16 Nonblocking Video Crosspoint Switch with On-Screen Display Insertion and I/O Buffers Maxim

Other Datasheets by Maxim Integrated (Analog Devices)

Part Number Description
MAX4354 Single-Supply Op Amps
MAX4308 Ultra-Low-Distortion Op Amps
MAX4309 Ultra-Low-Distortion Op Amps
MAX4310 Video Multiplexer-Amplifiers
MAX4311 Video Multiplexer-Amplifiers

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
19-1824; Rev 1; 1/05 MAX4452/MAX4453/MAX4454/MAX4352/MAX4353/MAX4354 Low-Cost, +3V/+5V, 620µA, 200MHz, Single-Supply Op Amps with Rail-to-Rail Outputs SUPPLY CURRENT (mA) MAX4452/3/4 toc01 General Description The MAX4452/MAX4352 single, MAX4453/MAX4353 dual, and MAX4454/MAX4354 quad amplifiers combine high-speed performance with ultra-low power consumption. The MAX4452/MAX4453/MAX4454 are unitygain stable and achieve a -3dB bandwidth of 200MHz, while the MAX4352/MAX4353/MAX4354 are compensated for a minimum closed-loop gain of +5V/V and achieve a 80MHz -3dB bandwidth. These devices consume only 620µA of supply current per amplifier. These amplifiers operate from a +2.7V to +5.25V single supply and feature rail-to-rail outputs.
Published: |