Datasheet4U Logo Datasheet4U.com

MAX260 - Microprocessor Programmable Universal Active Filters

Download the MAX260 datasheet PDF. This datasheet also covers the MAX262 variant, as both devices belong to the same microprocessor programmable universal active filters family and are provided as variant models within a single manufacturer datasheet.

Description

The MAX260/MAX261/MAX262 CMOS dual secondorder universal switched-capacitor active filters allow microprocessor control of precise filter functions.

No external components are required for a variety of bandpass, lowpass, highpass, notch, and allpass configurations.

📥 Download Datasheet

Note: The manufacturer provides a single datasheet file (MAX262-MaximIntegrated.pdf) that lists specifications for multiple related part numbers.

📁 Similar Datasheet

Part Number Description Manufacturer
MAX2601 1W RF Power Transistors Maxim
MAX2602 1W RF Power Transistors Maxim
MAX2605 Integrated IF VCOs Maxim
MAX2606 Integrated IF VCOs Maxim
MAX2608 Integrated IF VCOs Maxim

Other Datasheets by Maxim Integrated (Analog Devices)

Part Number Description
MAX2607 Integrated IF VCOs
MAX2609 Integrated IF VCOs
MAX261 Microprocessor Programmable Universal Active Filters
MAX2612 40MHz to 4GHz Linear Broadband Amplifiers
MAX2613 40MHz to 4GHz Linear Broadband Amplifiers

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
19-0352; Rev 2; 7/02 MAX260/MAX261/MAX262 Microprocessor Programmable Universal Active Filters General Description The MAX260/MAX261/MAX262 CMOS dual secondorder universal switched-capacitor active filters allow microprocessor control of precise filter functions. No external components are required for a variety of bandpass, lowpass, highpass, notch, and allpass configurations. Each device contains two second-order filter sections that place center frequency, Q, and filter operating mode under programmed control. An input clock, along with a 6-bit f0 program input, determine the filter's center or corner frequency without affecting other filter parameters. The filter Q is also programmed independently.
Published: |