MAX20361 Datasheet | Maxim Integrated

Click here for production status of specific part numbers. Small, Single-/Multi-Cell Solar Harvester with MPPT and Harvest Counter General Description The MAX20361 is a fully integrated solution for harvesting energy from single-/multi-cell solar sources. The device includes an ultra-low quiescent current (360n A) boost converter that is capable of starting from input voltages as low as 225m V (typ). In order to maximize the power extracted from the source, the MAX20361 implements a proprietary maximum power point tracking (MPPT) technique that allows efficient harvesting from 15μW to over 300m W of available input power. The MAX20361 also Features an integrated charging and protection circuit that is optimized for Li-ion batteries, but can also be used to charge supercapacitors, thin-film batteries, or traditional capacitors. The charger Features a programmable charging cut-off voltage with thresholds programmable through I2C interface as well as temperature shutoff. The MAX20361 is available in a 12-bump, 0.4mm pitch, 1.63mm x 1.23mm wafer-level package (WLP). Applications - Wearable Fitness - Medical Devices - Industrial Io T Sensors - Asset Tracking Devices - Wireless Sensor Networks Benefits and Features - Single-/Multi-Cell Solar Energy Harvester - 225m V to 2.5V (typ) Input-Voltage Range - Efficient Harvesting from 15μW to Over 300m W of Available Input Power - 86% Efficiency at VSYS = 3.8V, ISRC = 30m A - Small Solution Size - Utilizes Small 2016 4.7μH Inductor - Maximum Power Point Tracking (MPPT) Technique Using Fractional VOC Method - Programmable Fractional VOC Regulation Point through I2C Interface - Battery/Supercapacitor Charger - Programmable Battery Termination Voltage through I2C Interface - Programmable Power Good Wake-Up Signal Output Threshold through I2C Interface Ordering Information at end of data sheet. 19-100866; Rev 1; 9/20 Simplified Block Diagram Small, Single-/Multi-Cell Solar Harvester with MPPT and Harvest...