Datasheet4U Logo Datasheet4U.com

MAX14782E - 500Kbps 3.3V to 5V RS-485/RS-422 Transceiver

General Description

The MAX14782E is a 3.3V to 5V ESD-protected transceiver intended for half-duplex RS-485/RS-422 communication up to 500kbps.

The device is optimized for extended cable runs while maximizing tolerance to noise.

Key Features

  • include short-circuit-protected outputs, hot-swap functionality, and a true fail-safe receiver, guaranteeing a logic-high receiver output when inputs are shorted or open. Hotswap capability eliminates undesired transitions on the bus during power-up or hot insertion. The transceiver draws 1.9mA (typ) supply current when unloaded or when fully loaded with the drivers disabled and draws less than 10µA (max) of supply current in lowpower shutdown mode. The MAX14782E is available in 8-pin µMAX®, 8-p.

📥 Download Datasheet

Other Datasheets by Maxim Integrated (now Analog Devices)

Part Number Description
MAX14781E Half-Duplex RS-485 Transceiver
MAX14783E High-Speed 3.3V/5V RS-485/RS-422 Transceiver
MAX14784E RS-485 Transceivers
MAX14786E RS-485 Transceivers
MAX14787E RS-485 Transceivers
MAX14789E RS-485 Transceivers
MAX14720 Power-Management Solution
MAX14724 Serial-Controlled 8:4 Matrix Switch Multiplexer
MAX14745 PMIC
MAX14750 Power-Management Solution

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
MAX14782E EVALUATION KIT AVAILABLE 500Kbps 3.3V to 5V RS-485/RS-422 Transceiver with ±35kV HBM ESD Protection General Description The MAX14782E is a 3.3V to 5V ESD-protected transceiver intended for half-duplex RS-485/RS-422 communication up to 500kbps. The device is optimized for extended cable runs while maximizing tolerance to noise. The MAX14782E integrated protection features include short-circuit-protected outputs, hot-swap functionality, and a true fail-safe receiver, guaranteeing a logic-high receiver output when inputs are shorted or open. Hotswap capability eliminates undesired transitions on the bus during power-up or hot insertion. The transceiver draws 1.