Datasheet4U Logo Datasheet4U.com

MAX14001 - Isolated 10-bit ADCs

Description

The MAX14001/MAX14002 are isolated, single-channel analog-to-digital converters (ADCs) with programmable voltage comparators and inrush current control optimized for configurable binary input applications.

Features

  • Enables Robust Detection of Binary Inputs.
  • Programmable Input Bias Current Rejects Line Noise.
  • 3.75kVRMS of Isolation for 60 Seconds.
  • 5.5mm of Creepage and Clearance.
  • Group II CTI Package Material.
  • Reduces BOM and Board Space Through High Integration.
  • 10-bit, 10ksps ADC.
  • Binary Threshold Comparators.
  • Control Circuit for Driving a Depletion Mode FET.
  • Isolation for Both Data and DC-DC Supply.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
MAX1400 Oversampling (Sigma-Delta) ADC Maxim
MAX140 3 1/2 Digit A/D Converters Maxim
MAX1401 #V / 18-Bit / Low-Power / Multichannel / Oversampling Sigma-Delta ADC Maxim
MAX1402 +5V / 18-Bit / Low-Power / Multichannel / Oversampling Sigma-Delta ADC Maxim
MAX1403 +3V / 18-Bit / Low-Power / Multichannel / Oversampling Sigma-Delta ADC Maxim

Other Datasheets by Maxim Integrated (Analog Devices)

Part Number Description
MAX14002 Isolated 10-bit ADCs
MAX1408 16-Bit Multichannel DAS
MAX1409 16-Bit Multichannel DAS
MAX14130 4-Channel Digital Isolators
MAX14131 4-Channel Digital Isolators

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
MAX14001/MAX14002 EVALUATION KIT AVAILABLE Configurable, Isolated 10-bit ADCs for Multi-Range Binary Inputs General Description The MAX14001/MAX14002 are isolated, single-channel analog-to-digital converters (ADCs) with programmable voltage comparators and inrush current control optimized for configurable binary input applications. 3.75kVRMS of integrated isolation is provided between the binary input side (field-side) and the comparator output/SPI-side (logic-side) of the MAX14001/MAX14002. An integrated, isolated, DC-DC converter powers all field-side circuitry, and this allows running field-side diagnostics even when no input signal is present. The 20-pin SSOP package provides 5.5mm of creepage and clearance with group II CTI rating.