Datasheet4U Logo Datasheet4U.com

MAX11192 - Dual Simultaneous Sampling SAR ADCs

General Description

The MAX11192/MAX11195/MAX11198 is a dual-channel SAR ADCs with simultaneous sampling at 2Msps, 12-/14/16-bit resolution, and differential inputs.

Key Features

  • ​Tiny 16-Pin, 3mm x 2mm, TDFN Package.
  • Up to 2Msps Throughput Rate.
  • Two Simultaneous-Sampling ADC Cores.
  • 2.5V Integrated Reference and Reference Buffers.
  • Two Data Outputs for the Two Simultaneous- Sampling ADCs.
  • No Overhead Clock Cycles; 12/14/16 Clock Cycles for 12-/14-/16-Bit Result.
  • Balanced, Differential Input Range of ±VREF Ordering Information appears at end of data sheet. VREF 0.5 x VREF 0V VREF 0.5 x VREF 0V VREF 0.5.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
MAX1119 Single-Supply / Low-Power / 2-Channel / Serial 8-Bit ADCs Maxim
MAX111 Low-Cost / 2-Channel / 14-Bit Serial ADCs Maxim
MAX11102 Serial 12-/10-/8-Bit ADCs Maxim Integrated Products
MAX11103 Serial 12-/10-/8-Bit ADCs Maxim Integrated Products
MAX11105 Serial 12-/10-/8-Bit ADCs Maxim Integrated Products

Other Datasheets by Maxim Integrated (now Analog Devices)

Part Number Description
MAX11195 Dual Simultaneous Sampling SAR ADCs
MAX11198 Dual Simultaneous Sampling SAR ADCs
MAX1110 Serial 8-Bit ADCs
MAX11100 200ksps ADC
MAX11101 200ksps ADC

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
MAX11192/MAX11195/ MAX11198 EVALUATION KIT AVAILABLE 12-/14-/16-Bit, 2Msps, Dual Simultaneous Sampling SAR ADCs with Internal Reference General Description The MAX11192/MAX11195/MAX11198 is a dual-channel SAR ADCs with simultaneous sampling at 2Msps, 12-/14/16-bit resolution, and differential inputs. Available in a tiny 16-pin, 3mm x 2mm ultra TDFN package, this ADC delivers excellent static and dynamic performance while operating from a supply voltage over the range of 3.0V to 5.25V. An integrated reference further reduces board area and component count. The MAX11192/MAX11195/MAX11198 output conversion data using an SPI-compatible serial interface with a dual DOUT bus. Specifications apply over the extended industrial temperature range of -40°C to +125°C.