DS3900P2 Datasheet | Maxim Integrated

Description The DS3900P2 programmer provides bidirectional munication with I2C-patible devices using a PC’s USB port. The DS3900P2 is a small form-factor module that requires appropriate headers to pass munication signals to the device under test. The DS3900P2 is intended to interface with approved Human Interface Device (HID)-pliant PC software designed by Maxim Integrated. It is intended for evaluation purposes only. EV Kit Contents - - Assembled DS3900P2 Circuit Board - - Micro-USB Cable - - Ribbon Cable Ordering Information appears at end of data sheet. Features - - municates from PCs to ICs and Select Maxim Integrated EV Kits Through a USB Port Using the HID Class - - Fast munication to I2C-patible Devices - - Built-In Pullup Resistors for SDA and SCL Minimize Required External Hardware - - Connection to Standard Prototyping Boards and EV Kits Possible Using Header Connectors - - Fully USB Powered - - Can Provide a 3.3V, 250m A Power Rail - - Fully Assembled and Tested Proven PCB Layout - - USB HID Interface for Windows XP®-, Windows Vista®-, and Windows® 7-patible Software - - Ro HS pliant DS3900P2 USB I2C Programmer Windows, Windows Vista, and Windows XP are registered trademarks of Microsoft Corp. 19-6778; Rev 0; 8/13 USB HID munications Module for I2C Programming Quick Start Required Equipment - DS3900P2 EV kit hardware (included) - Micro-USB cable (included) - User-supplied PC with Windows XP, Windows Vista, or Windows 7 OS with USB Port - Approved previously designed HID-pliant GUI designed by Maxim Integrated - Customer PCB with I2C connection or a previously purchased patible Maxim Integrated EV kit Setup Procedure The DS3900P2 municates with ICs using a PC’s USB port. The microprocessor on the DS3900P2 municates to the PC using its full-speed patible USB serial interface engine. The USB interface of the DS3900P2 hardware is configured as an HID device and, therefore, does not require a unique/custom device driver. Once properly connected to a PC...