Datasheet4U Logo Datasheet4U.com

DS1804 - Nonvolatile Trimmer Potentiometer

Description

H - High-Terminal of Potentiometer L - Low-Terminal of Potentiometer W - Wiper of Potentiometer VCC - 3V or 5V Power Supply CS - Chip Select U/ D - Up/Down Control INC - Increment/Decrement Wiper Control GND - Ground DESCRIPTION The DS1804 NV trimmer potentiometer is a nonvolatile digital

Features

  • Single 100-Position Taper Potentiometer.
  • Nonvolatile (NV) On-Demand Wiper Storage.
  • Operates from 3V or 5V Supplies.
  • Up/Down, Increment-Controlled Interface.
  • Available in 8-Pin (300 mils) DIP, 8-Pin (150 mils) SO, and 8-Pin (118 mils) µSOP.
  • -40°C to +85°C Operating Temperature Range.
  • Standard Resistance Values:.
  • DS1804-010: 10kΩ.
  • DS1804-050: 50kΩ.
  • DS1804-100: 100kΩ PIN.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
DS1800 Dual Inverting Log Gain/Attenuator Dallas Semiconducotr
DS1800-3 AC-DC / Distributed Power Front-End 1U Emerson
DS1801 Dual Audio Taper Potentiometer Dallas Semiconducotr
DS1802 Dual Audio Taper Potentiometer Dallas Semiconducotr
DS1806 Digital Sextet Potentiometer Dallas Semiconducotr

Other Datasheets by Maxim Integrated (Analog Devices)

Part Number Description
DS1803 Addressable Dual Digital Potentiometer
DS1805 Addressable Digital Potentiometer
DS1808 Dual Log Digital Potentiometer
DS1809 Dallastat
DS1813 5V EconoReset

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
19-5876; Rev 6/11 DS1804 Nonvolatile Trimmer Potentiometer FEATURES  Single 100-Position Taper Potentiometer  Nonvolatile (NV) On-Demand Wiper Storage  Operates from 3V or 5V Supplies  Up/Down, Increment-Controlled Interface  Available in 8-Pin (300 mils) DIP, 8-Pin (150 mils) SO, and 8-Pin (118 mils) µSOP  -40°C to +85°C Operating Temperature Range  Standard Resistance Values: – DS1804-010: 10kΩ – DS1804-050: 50kΩ – DS1804-100: 100kΩ PIN ASSIGNMENT INC 1 U/D 2 H3 GND 4 8 VCC 7 CS 6L 5W DIP (300 mils) SO (150 mils) μSOP (118 mils) PIN DESCRIPTION H - High-Terminal of Potentiometer L - Low-Terminal of Potentiometer W - Wiper of Potentiometer VCC - 3V or 5V Power Supply CS - Chip Select U/ D - Up/Down Control INC - Increment/Decrement Wiper Control GND - Ground DESCRI
Published: |