Datasheet4U Logo Datasheet4U.com

DS1624 - Digital Thermometer/Memory

Description

The DS1624 consists of two separate functional units: a 256-byte nonvolatile E2 memory and a direct-to-digital temperature sensor.

The nonvolatile memory is made up of 256 bytes of E2 memory.

This memory can be used to store any type of information the user wishes.

Features

  • Reduces Component Count with Integrated Temperature Sensor and Nonvolatile E2 Memory.
  • Measures Temperatures from -55°C to +125°C in 0.0625°C Increments.
  • ±0.5°C Accuracy from 0°C to 70°C.
  • 256 Bytes of E2 Memory for Storing Information Such as Frequency Compensation Coefficients.
  • No External Components.
  • Easy-to-Use 2-Wire Serial Interface.
  • Temperature is Read as a 12-Bit Value (2-Byte Transfer).
  • Available in 8-Pin SO.

📥 Download Datasheet

📁 Similar Datasheet

Other Datasheets by Maxim Integrated
  • DS1620 - Digital Thermometer/Thermostat
  • DS1621 - Digital Thermometer
  • DS1626 - High-Precision 3-Wire Digital Thermometer/Thermostat
  • DS1629 - 2-Wire Digital Thermometer and Real-Time Clock
  • DS1602 - Elapsed Time Counter
  • DS1603 - Elapsed Time Counter
  • DS1642 - Nonvolatile Timekeeping RAM
  • DS1644 - Nonvolatile Timekeeping RAM

Full PDF Text Transcription

Click to expand full text
DS1624 Digital Thermometer and Memory General Description The DS1624 consists of two separate functional units: a 256-byte nonvolatile E2 memory and a direct-to-digital temperature sensor. The nonvolatile memory is made up of 256 bytes of E2 memory. This memory can be used to store any type of information the user wishes. These memory locations are accessed through the 2-wire serial bus. The direct-to-digital temperature sensor allows the DS1624 to measure the ambient temperature and report the temperature in a 12-bit word with 0.0625°C resolution. The temperature sensor and its related registers are accessed through the 2-wire serial interface. Figure 1 shows a block diagram of the DS1624.
Published: |