Datasheet4U Logo Datasheet4U.com

DG1209 - Analog Multiplexers

Download the DG1209 datasheet PDF. This datasheet also covers the DG1208 variant, as both devices belong to the same analog multiplexers family and are provided as variant models within a single manufacturer datasheet.

Description

The DG1208 and DG1209 are low-leakage, low-chargeinjection, single 8-channel or dual 4-channel multiplexing switch devices.

The DG1208 uses three selection inputs A2, A1, and A0 to determine the switching logic; the DG1209 uses two selection inputs A1 and A0.

Features

  • Distortion-Free Measurement.
  • 100Ω (typ) On Resistance.
  • ≤ 1nA (max) On/Off-Leakage Current at +85°C.
  • ≤ 0.5pC (typ) Charge Injection.
  • Wide Supply Range with Low Supply Current.
  • 40μA (typ) Quiescent Current at Room Temperature.
  • Fully Specified with ±15V Bipolar Supplies or +12V Single Supply.
  • Rail-to-Rail Operation.
  • Flexible Design Option.
  • GPIO-Compatible Control Inputs.
  • EN Input to Enable/Disable Device.

📥 Download Datasheet

Note: The manufacturer provides a single datasheet file (DG1208-MaximIntegrated.pdf) that lists specifications for multiple related part numbers.

📁 Similar Datasheet

Part Number Description Manufacturer
DG120X07T2 IGBT STARPOWER
DG12128-02 128 X 128 Dots Display Optologic
DG12864 DG-12864 Excel Technology
DG12N60 N-CHANNEL ENHANCEMENT MODE MOSFET DGME
DG12N65 N-CHANNEL ENHANCEMENT MODE MOSFET DGME

Other Datasheets by Maxim Integrated (Analog Devices)

Part Number Description
DG1208 Analog Multiplexers

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
EVALUATION KIT AVAILABLE Click here to ask about the production status of specific part numbers. DG1208/DG1209 Low-Leakage, Single 8-Channel and Dual 4-Channel, Analog Multiplexers General Description The DG1208 and DG1209 are low-leakage, low-chargeinjection, single 8-channel or dual 4-channel multiplexing switch devices. The DG1208 uses three selection inputs A2, A1, and A0 to determine the switching logic; the DG1209 uses two selection inputs A1 and A0. On both devices, an enable (EN) input is used to enable or disable the device. The low capacitance and low charge injection of the DG1208/DG1209 make them ideal for automatic test equipment systems, data acquisition systems and sampleand-hold systems where low glitch and fast settling time are required.
Published: |