Datasheet4U Logo Datasheet4U.com

MAX6403 - uP Supervisory Circuits

Description

The MAX6400

MAX6405 is a family of ultra-low power microprocessor (µP) supervisory circuits used for monitoring battery, power-supply, and regulated system voltages.

Each device contains a precision bandgap reference comparator and is trimmed to specified trip threshold voltages.

Features

  • o Ultra-Small 4-Bump (2 ✕ 2) Chip-Scale Package, (Package Pending Full Qualification.
  • Expected Completion Date 6/30/01. See UCSP Reliability Section for More Details. ) o 70% Smaller Than SC70 Package o Ultra-Low 500nA (typ) Supply Current (MAX6400/MAX6401/MAX6402) o Factory-Trimmed Reset Thresholds from 2.20V to 4.63V in Approximately 100mV Increments o ±2.5% Threshold Accuracy -40°C to +85°C o Factory-Set 100ms (min) Reset Timeout Period o Manual Reset Input o Guaranteed Reset Valid to V.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
MAX6406 Voltage Detectors Maxim Integrated Products
MAX6407 Voltage Detectors Maxim Integrated Products
MAX6408 Voltage Detectors Maxim Integrated Products
MAX6409 Voltage Detectors Maxim Integrated Products
MAX6410 Voltage Detectors Maxim Integrated Products

Other Datasheets by Maxim Integrated (Analog Devices)

Part Number Description
MAX640 Step-Down DC-DC Converters
MAX6400 uP Supervisory Circuits
MAX6401 uP Supervisory Circuits
MAX6402 uP Supervisory Circuits
MAX6404 uP Supervisory Circuits

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
19-2043; Rev 1; 8/01 µP Supervisory Circuits in 4-Bump (2 ✕ 2) Chip-Scale Package General Description The MAX6400–MAX6405 is a family of ultra-low power microprocessor (µP) supervisory circuits used for monitoring battery, power-supply, and regulated system voltages. Each device contains a precision bandgap reference comparator and is trimmed to specified trip threshold voltages. These devices provide excellent circuit reliability and low cost by eliminating external components and adjustments when monitoring system voltages from 2.5V to 5.0V. A manual reset input is also included. The MAX6400–MAX6405 assert a reset signal whenever the VCC supply voltage falls below a preset threshold. These devices are differentiated by their output logic configurations and preset threshold voltages.
Published: |