Datasheet4U Logo Datasheet4U.com

MAX5404 - Dual 256-Tap / Low-Drift / Digital Potentiometers

Description

The MAX5403/MAX5404/MAX5405 is a family of dual linear taper digital potentiometers.

Each device has one 3-terminal potentiometer and one 2-terminal variable resistor (Figure 1).

Features

  • o 10-Pin µMAX Small Footprint Package MAX5403/MAX5404/MAX5405.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
MAX5406 Audio Processor Maxim Integrated Products
MAX5409 Log Taper Digital Potentiometers Maxim Integrated
MAX5410 Log Taper Digital Potentiometers Maxim Integrated
MAX5414 Digital Potentiometers Maxim Integrated
MAX5417 256-Tap Nonvolatile I2C-Interface Digital Potentiometers Maxim Integrated Products

Other Datasheets by Maxim Integrated (Analog Devices)

Part Number Description
MAX5400 256-Tap SOT-PoT / Low-Drift Digital Potentiometers in SOT23
MAX5401 256-Tap SOT-PoT / Low-Drift Digital Potentiometers in SOT23
MAX5402 256-Tap / PoT / Low-Drift / Digital Potentiometer
MAX5403 Dual 256-Tap / Low-Drift / Digital Potentiometers
MAX5405 Dual 256-Tap / Low-Drift / Digital Potentiometers

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
19-1934; Rev 1; 4/01 Dual 256-Tap, Low-Drift, Digital Potentiometers in 10-µMAX General Description The MAX5403/MAX5404/MAX5405 is a family of dual linear taper digital potentiometers. Each device has one 3-terminal potentiometer and one 2-terminal variable resistor (Figure 1). The MAX5403/MAX5404/MAX5405 operate from +2.7V to +5.5V single-supply voltages and use an ultra-low supply current of 0.1µA. These devices also provide glitchless switching between resistors taps as well as a convenient power-on reset (POR) that sets the wiper to the midscale position at power-up. The potentiometer consists of a fixed resistor with a wiper contact that is digitally controlled through a 3-wire serial interface and has 256-tap points.
Published: |