Datasheet4U Logo Datasheet4U.com

MAX5187 - 8-Bit / 40MHz / Current / Voltage-Output DACs

Description

The MAX5187 is an 8-bit, current-output digital-to-analog converter (DAC) designed for superior performance in signal reconstruction or arbitrary waveform generation applications requiring analog signal reconstruction with low distortion and low-power operation.

Features

  • o +2.7V to +3.3V Single-Supply Operation o Wide Spurious-Free Dynamic Range: 70dB at fOUT = 2.2MHz o Fully Differential Output o Low-Current Standby or Full Shutdown Modes o Internal +1.2V Low-Noise Bandgap Reference o Small 24-Pin QSOP Package PART MAX5187BEEG MAX5190BEEG Ordering Information TEMP. RANGE -40°C to +85°C -40°C to +85°C PIN-.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
MAX5183 Current/Voltage Simultaneous-Output DACs Maxim Integrated
MAX5185 40MHz Current/Voltage Alternate-Phase Output DACs Maxim Integrated
MAX5189 Dual / 8-Bit / 40MHz / Current/Voltage / Simultaneous-Output DACs Maxim Integrated
MAX5109 8-Bit DACs Maxim Integrated Products
MAX5113 14-Bit Current DAC Maxim Integrated

Other Datasheets by Maxim Integrated (Analog Devices)

Part Number Description
MAX518 2-Wire Serial 8-Bit DACs
MAX5180 Current/Voltage Simultaneous-Output DACs
MAX5181 10-Bit / 40MHz / Current/Voltage-Output DACs
MAX5182 40MHz Current/Voltage Alternate-Phase Output DACs
MAX5184 10-Bit / 40MHz / Current/Voltage-Output DACs

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
19-1582; Rev 2; 12/01 8-Bit, 40MHz, Current/Voltage-Output DACs MAX5187/MAX5190 General Description The MAX5187 is an 8-bit, current-output digital-to-analog converter (DAC) designed for superior performance in signal reconstruction or arbitrary waveform generation applications requiring analog signal reconstruction with low distortion and low-power operation. The voltage-output MAX5190 provides equal specifications, with on-chip precision resistors for voltage output operation. Both devices are designed for a 10pVs glitch operation to minimize unwanted spurious signal components at the output. An on-board +1.2V bandgap circuit provides a well-regulated, low-noise reference that can be disabled for external reference operation.
Published: |