Datasheet4U Logo Datasheet4U.com

MAX5018 - 8-Bit / High-Speed DAC

Description

The MAX5018 is a monolithic, 8-bit digital-to-analog converter (DAC) capable of accepting video data at 165Msps or 275Msps.

Features

  • o 275Msps Conversion Rate (MAX5018A) 165Msps Conversion Rate (MAX5018B) o TDC1018 and HDAC10180 Compatible with Improved Performance o RS-343-A Compatible o Complete Video Controls: Sync, Blank, Bright, and Reference White (force high) o ECL Compatible o Single Power Supply o Registered Data and Video Controls o Differential Current Outputs o ESD-Protected Data and Control Inputs MAX5018 ________________________.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
MAX5014 Current-Mode PWM Controllers Maxim Integrated
MAX5015 Current-Mode PWM Controllers Maxim Integrated
MAX5033 MAXPower Step-Down DC-DC Converter Maxim Integrated
MAX5041 Dual-Phase / Parallelable / Average Current-Mode Controllers Maxim Integrated
MAX5041A Dual-Phase / Parallelable / Average-Current-Mode Controllers Maxim Integrated

Other Datasheets by Maxim Integrated (Analog Devices)

Part Number Description
MAX501 Voltage-Output / 12-Bit Multiplying DACs
MAX5012 12-Bit / 100Msps ECL DAC
MAX5013 12-Bit / 100Msps TTL DAC
MAX5019 Current-Mode PWM Controllers with Integrated Startup Circuit
MAX500 CMOS / Quad / Serial-Interface 8-Bit DAC

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
19-1204; Rev 0; 3/97 8-Bit, High-Speed DAC _______________General Description The MAX5018 is a monolithic, 8-bit digital-to-analog converter (DAC) capable of accepting video data at 165Msps or 275Msps. Complete with video controls (sync, blank, reference white (force high), and bright), the MAX5018 directly drives doubly terminated 50Ω or 75 Ω loads to standard composite video levels. Standard setup level is 7.5IRE. The MAX5018 is pin compatible with the HDAC10180 and the TDC1018, with improved performance. The MAX5018 contains data and control input registers, video control logic, reference buffer, and current switches. Two performance grades of the MAX5018 are available. Both are packaged in a 24-pin PDIP in the -20°C to +85°C industrial temperature range.
Published: |