Datasheet4U Logo Datasheet4U.com

MAX4552 - SPST Analog Switches

Description

The MAX4551/MAX4552/MAX4553 are quad, low-voltage, single-pole/single-throw (SPST) analog switches.

Each switch is protected against ±15kV electrostatic discharge (ESD) shocks, without latchup or damage.

Features

  • o ±15kV ESD Protection per IEC 1000-4-2 o +2V to +12V Single Supply ±2V to ±6V Dual Supplies o 120Ω Signal Paths with ±5V Supplies o Low Power Consumption:.

📥 Download Datasheet

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
19-1391; Rev 0; 10/98 ±15kV ESD-Protected, Quad, Low-Voltage, SPST Analog Switches General Description The MAX4551/MAX4552/MAX4553 are quad, low-voltage, single-pole/single-throw (SPST) analog switches. Each switch is protected against ±15kV electrostatic discharge (ESD) shocks, without latchup or damage. On-resistance (100Ω max) is matched between switches to 4Ω max, and is flat (8Ω max) over the specified signal range. Each switch can handle Rail-to-Rail® analog signals. The off-leakage current is only 1nA at +25°C and 10nA at +85°C. The MAX4551 has four normally closed (NC) switches, and the MAX4552 has four normally open (NO) switches. The MAX4553 has two NC and two NO switches.
Published: |