Datasheet4U Logo Datasheet4U.com

MAX4472 - Single/Dual/Quad / !.8V/750nA / SC70 / Rail-to-Rail Op Amps

Download the MAX4472 datasheet PDF. This datasheet also covers the MAX variant, as both devices belong to the same single/dual/quad / !.8v/750na / sc70 / rail-to-rail op amps family and are provided as variant models within a single manufacturer datasheet.

Description

The MAX4464/MAX4470/MAX4471/MAX4472/MAX4474 family of micropower op amps operate from a single +1.8V to +5.5V supply and draw only 750nA of supply current.

The MAX4470 family feature ground-sensing inputs and Rail-to-Rail ® output.

Features

  • o Ultra-Low 750nA Supply Current Per Amplifier o Ultra-Low +1.8V Supply Voltage Operation o Ground-Sensing Input Common-Mode Range o Outputs Swing Rail-to-Rail o Outputs Source and Sink 11mA of Load Current o No Phase Reversal for Overdriven Inputs o High 120dB Open-Loop Voltage Gain o Low 500µV Input Offset Voltage o 9kHz Gain-Bandwidth Product (MAX4470/MAX4471/MAX4472) o 40kHz Gain-Bandwidth Product (MAX4464/MAX4474) o 250pF (min) Capacitive Load Capability o Available in Tiny 5-Pin SC70 and 8.

📥 Download Datasheet

Note: The manufacturer provides a single datasheet file (MAX-4470.pdf) that lists specifications for multiple related part numbers.

📁 Similar Datasheet

Part Number Description Manufacturer
MAX4475 Rail-to-Rail Op Amps Maxim Integrated
MAX4476 Rail-to-Rail Op Amps Maxim Integrated
MAX4477 Rail-to-Rail Op Amps Maxim Integrated
MAX4478 Rail-to-Rail Op Amps Maxim Integrated
MAX4400 Rail-to-Rail Op Amps Maxim Integrated

Other Datasheets by Maxim Integrated (Analog Devices)

Part Number Description
MAX4470 Single/Dual/Quad / !.8V/750nA / SC70 / Rail-to-Rail Op Amps
MAX4471 Single/Dual/Quad / !.8V/750nA / SC70 / Rail-to-Rail Op Amps
MAX4473 Low-Cost / Low-Voltage / PA Power Control Amplifier
MAX4474 Single/Dual/Quad / !.8V/750nA / SC70 / Rail-to-Rail Op Amps
MAX440 High-Speed Video Multiplixer/Amplifier

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
19-2021; Rev 2; 2/03 Single/Dual/Quad, +1.8V/750nA, SC70, Rail-to-Rail Op Amps MAX4464/MAX4470/MAX4471/MAX4472/MAX4474 General Description The MAX4464/MAX4470/MAX4471/MAX4472/MAX4474 family of micropower op amps operate from a single +1.8V to +5.5V supply and draw only 750nA of supply current. The MAX4470 family feature ground-sensing inputs and Rail-to-Rail ® output. The ultra-low supply current, low-operating voltage, and rail-to-rail output capabilities make these operational amplifiers ideal for use in single lithium ion (Li+), or two-cell NiCd or alkaline battery systems.
Published: |