Datasheet4U Logo Datasheet4U.com

MAX4464 - Single/Dual/Quad / !.8V/750nA / SC70 / Rail-to-Rail Op Amps

General Description

The MAX4464/MAX4470/MAX4471/MAX4472/MAX4474 family of micropower op amps operate from a single +1.8V to +5.5V supply and draw only 750nA of supply current.

The MAX4470 family feature ground-sensing inputs and Rail-to-Rail ® output.

Key Features

  • o Ultra-Low 750nA Supply Current Per Amplifier o Ultra-Low +1.8V Supply Voltage Operation o Ground-Sensing Input Common-Mode Range o Outputs Swing Rail-to-Rail o Outputs Source and Sink 11mA of Load Current o No Phase Reversal for Overdriven Inputs o High 120dB Open-Loop Voltage Gain o Low 500µV Input Offset Voltage o 9kHz Gain-Bandwidth Product (MAX4470/MAX4471/MAX4472) o 40kHz Gain-Bandwidth Product (MAX4464/MAX4474) o 250pF (min) Capacitive Load Capability o Available in Tiny 5-Pin SC70 and 8.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
MAX4465 Low-Cost Micropower Microphone Preamplifiers Maxim Integrated
MAX4466 Low-Cost Micropower Microphone Preamplifiers Maxim Integrated
MAX4467 Low-Cost Micropower Microphone Preamplifiers Maxim Integrated
MAX4468 Low-Cost Micropower Microphone Preamplifiers Maxim Integrated
MAX4469 Low-Cost Micropower Microphone Preamplifiers Maxim Integrated

Other Datasheets by Maxim Integrated (Analog Devices)

Part Number Description
MAX4460 SOT23 / 3V/5V / Single-Supply / Rail-to-Rail Instrumentation Amplifiers
MAX4461 SOT23 / 3V/5V / Single-Supply / Rail-to-Rail Instrumentation Amplifiers
MAX4462 SOT23 / 3V/5V / Single-Supply / Rail-to-Rail Instrumentation Amplifiers
MAX440 High-Speed Video Multiplixer/Amplifier
MAX44004 Digital Ambient Light Sensor

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
19-2021; Rev 2; 2/03 Single/Dual/Quad, +1.8V/750nA, SC70, Rail-to-Rail Op Amps MAX4464/MAX4470/MAX4471/MAX4472/MAX4474 General Description The MAX4464/MAX4470/MAX4471/MAX4472/MAX4474 family of micropower op amps operate from a single +1.8V to +5.5V supply and draw only 750nA of supply current. The MAX4470 family feature ground-sensing inputs and Rail-to-Rail ® output. The ultra-low supply current, low-operating voltage, and rail-to-rail output capabilities make these operational amplifiers ideal for use in single lithium ion (Li+), or two-cell NiCd or alkaline battery systems.