Datasheet4U Logo Datasheet4U.com

MAX4243 - Single/Dual/Quad / !.8V/10A / SOT23 / Beyond-the-Rails Op Amps

This page provides the datasheet information for the MAX4243, a member of the MAX Single/Dual/Quad / !.8V/10A / SOT23 / Beyond-the-Rails Op Amps family.

Description

The MAX4240

MAX4244 family of micropower op amps operate from a single +1.8V to +5.5V supply or dual ±0.9V to ±2.75V supplies and have Beyond-the-Rails™ inputs and Rail-to-Rail ® output capabilities.

Features

  • o Ultra-Low-Voltage Operation: Guaranteed Down to +1.8V Typical Operation to +1.5V o Ultra-Low Power Consumption: 10µA Supply Current per Amplifier 1µA Shutdown Mode (MAX4241/MAX4243) Up to 200,000 Hours Operation from Two AA Alkaline Cells o Beyond-the-Rails Input Common-Mode Range o Outputs Swing Rail-to-Rail o No Phase Reversal for Overdriven Inputs o 200µV Input Offset Voltage o Unity-Gain Stable for Capacitive Loads up to 200pF o 90kHz Gain-Bandwidth Product o Available in Space-Saving 5-Pi.

📥 Download Datasheet

Datasheet preview – MAX4243

Datasheet Details

Part number MAX4243
Manufacturer Maxim
File Size 809.44 KB
Description Single/Dual/Quad / !.8V/10A / SOT23 / Beyond-the-Rails Op Amps
Datasheet download datasheet MAX4243 Datasheet
Additional preview pages of the MAX4243 datasheet.

📁 Similar Datasheet

  • MAX42402 - 2.5A Fully Integrated Synchronous Buck Converter (Analog Devices)
  • MAX42403 - 3.5A Fully Integrated Synchronous Buck Converter (Analog Devices)
  • MAX42405 - 5A Fully Integrated Synchronous Buck Converters (Analog Devices)
  • MAX42406 - 6A Fully Integrated Synchronous Buck Converters (Analog Devices)
  • MAX42408 - 8A Fully Integrated Buck Converter (Analog Devices)
  • MAX42410 - 10A Fully Integrated Buck Converter (Analog Devices)
  • MAX4200 - SOT23 Open-Loop Buffers (Maxim Integrated)
  • MAX4201 - SOT23 Open-Loop Buffers (Maxim Integrated)
  • MAX4202 - SOT23 Open-Loop Buffers (Maxim Integrated)
  • MAX4203 - SOT23 Open-Loop Buffers (Maxim Integrated)
Other Datasheets by Maxim
  • MAX4240 - Single/Dual/Quad / !.8V/10A / SOT23 / Beyond-the-Rails Op Amps
  • MAX4241 - Single/Dual/Quad / !.8V/10A / SOT23 / Beyond-the-Rails Op Amps
  • MAX4242 - Single/Dual/Quad / !.8V/10A / SOT23 / Beyond-the-Rails Op Amps
  • MAX4244 - Single/Dual/Quad / !.8V/10A / SOT23 / Beyond-the-Rails Op Amps
  • MAX4245 - Ultra-Small / Rail-to-Rail I/O with Disable / Single-/Dual-Supply / Low-Power Op Amps
  • MAX4246 - Ultra-Small / Rail-to-Rail I/O with Disable / Single-/Dual-Supply / Low-Power Op Amps
  • MAX4247 - Ultra-Small / Rail-to-Rail I/O with Disable / Single-/Dual-Supply / Low-Power Op Amps
  • MAX4249 - SOT23 / Single-Supply / Low-Noise / Low-Distortion / Rail-to-Rail Op Amps

Full PDF Text Transcription

Click to expand full text
19-1343; Rev 0; 3/98 Single/Dual/Quad, +1.8V/10µA, SOT23, Beyond-the-Rails Op Amps ________________General Description The MAX4240–MAX4244 family of micropower op amps operate from a single +1.8V to +5.5V supply or dual ±0.9V to ±2.75V supplies and have Beyond-the-Rails™ inputs and Rail-to-Rail ® output capabilities. These amplifiers provide a 90kHz gain-bandwidth product while using only 10µA of supply current per amplifier. The MAX4241/MAX4243 have a low-power shutdown mode that reduces supply current to less than 1µA and forces the output into a high-impedance state. Although the minimum operating voltage is specified at +1.8V, these devices typically operate down to +1.5V.
Published: |