Datasheet4U Logo Datasheet4U.com

MAX4094 - Single/Dual/Quad / Micropower / Single-Supply / Rail-to-Rail Op Amps

Download the MAX4094 datasheet PDF. This datasheet also covers the MAX variant, as both devices belong to the same single/dual/quad / micropower / single-supply / rail-to-rail op amps family and are provided as variant models within a single manufacturer datasheet.

Description

The single MAX4091, dual MAX4092, and quad MAX4094 operational amplifiers combine excellent DC accuracy with Rail-to-Rail® operation at the input and output.

Since the common-mode voltage extends from VCC to VEE, the devices can operate from either a single supply (2.7V to 6V) or split supplies (±1.

Features

  • o Low-Voltage, Single-Supply Operation (2.7V to 6V) MAX4091/MAX4092/MAX4094 Ordering Information PART MAX4091AUK-T MAX4091ASA MAX4091AUA MAX4092ASA MAX4092AUA MAX4094AUD MAX4094ASD TEMP RANGE -40°C to +125°C -40°C to +125°C -40°C to +125°C -40°C to +125°C -40°C to +125°C -40°C to +125°C -40°C to +125°C PIN-.

📥 Download Datasheet

Note: The manufacturer provides a single datasheet file (MAX-4091.pdf) that lists specifications for multiple related part numbers.

📁 Similar Datasheet

Part Number Description Manufacturer
MAX4092 Rail-to-Rail Op Amps Maxim Integrated
MAX40000 1.7V nanoPower Comparators Maxim Integrated
MAX40001 1.7V nanoPower Comparators Maxim Integrated
MAX40002 nanoPower 4-Bump Comparator Analog Devices
MAX40002 nanoPower 4-Bump Comparator Maxim Integrated

Other Datasheets by Maxim Integrated (Analog Devices)

Part Number Description
MAX409 1.2A Max / Single/Dual/Quad / Single-Supply Op Amps
MAX4090 3V/5V / 6dB Video Buffer with Sync-Tip Clamp and 150nA Shutdown Current
MAX4091 Single/Dual/Quad / Micropower / Single-Supply / Rail-to-Rail Op Amps
MAX409A (MAX406 - MAX419) Single-Supply Op Amps
MAX409B (MAX406 - MAX419) Single-Supply Op Amps

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
19-2272; Rev 0; 1/02 Single/Dual/Quad, Micropower, Single-Supply, Rail-to-Rail Op Amps General Description The single MAX4091, dual MAX4092, and quad MAX4094 operational amplifiers combine excellent DC accuracy with Rail-to-Rail® operation at the input and output. Since the common-mode voltage extends from VCC to VEE, the devices can operate from either a single supply (2.7V to 6V) or split supplies (±1.35V to ±3V). Each op amp requires less than 130µA of supply current. Even with this low current, the op amps are capable of driving a 1kΩ load, and the input-referred voltage noise is only 12nV/√Hz. In addition, these op amps can drive loads in excess of 2000pF.
Published: |