Datasheet4U Logo Datasheet4U.com

MAX3935 - 10.7Gbps EAM Driver

Description

The MAX3935 is designed to drive an electro-absorption modulator (EAM) at data rates up to 10.7Gbps.

It provides programmable output levels through externally adjustable bias and modulation currents.

This EAM driver is fabricated with Maxim’s in-house second-generation SiGe process.

Features

  • MAX3935† o Modulation Enable Control o ESD Protection Ordering Information PART MAX3935EGJ MAX3935E/D TEMP RANGE -40°C to +85°C -40°C to +85°C PIN-.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
MAX394 CMOS Analog Switch Analog Devices
MAX3940 10Gbps EAM Driver Maxim Integrated Products
MAX3942 10Gbps Modulator Driver Maxim Integrated Products
MAX3945 SFP+ Dual-Path Limiting Amplifier Maxim Integrated Products
MAX3946 SFP+ Laser Driver Maxim Integrated Products

Other Datasheets by Maxim Integrated (Analog Devices)

Part Number Description
MAX393 Precision / Quad / SPST Analog Switches
MAX3901 150Mbps Automotive Fiber Optic Receivers
MAX3902 150Mbps Automotive Fiber Optic Receivers
MAX391 Precision / Quad / SPST Analog Switches
MAX392 Precision / Quad / SPST Analog Switches

Full PDF Text Transcription

Click to expand full text
19-4803; Rev 1; 12/02 10.7Gbps EAM Driver General Description The MAX3935 is designed to drive an electro-absorption modulator (EAM) at data rates up to 10.7Gbps. It provides programmable output levels through externally adjustable bias and modulation currents. This EAM driver is fabricated with Maxim’s in-house second-generation SiGe process. The MAX3935 accepts differential ECL or ground-referenced CML clock and data-input signals. Inputs are terminated with on-chip 50Ω resistors. An input-data retiming latch can be used to reject input-patterndependent jitter if a clock signal is available. The driver can modulate EAM devices at amplitudes up to 3.0VP-P when the device impedance is 50Ω. Typical (20% to 80%) edge speeds are 34ps.
Published: |