Datasheet4U Logo Datasheet4U.com

MAX1963 - Low-Input-Voltage / 300mA LDO Regulators with RESETin SOT and TDFN

Description

The MAX1963/MAX1976 low-dropout linear regulators operate from a +1.62V to +3.6V supply and deliver a guaranteed 300mA continuous load current with a low 100mV dropout.

The high-accuracy (±0.5%) output voltage is preset to an internally trimmed voltage in the +0.75V to +3.0V range.

Features

  • include logic-controlled shutdown, short-circuit protection, and thermal-overload protection. o Low 1.62V Minimum Input Voltage o Guaranteed 300mA Output Current o ±1.5% Accuracy Over Load/Line/Temp o Low 100mV Dropout at 300mA Load o 2.2ms (MAX1963) or 70ms (MAX1976) RESET Output Flag o Supply Current Independent of Load and Dropout Voltage o Logic-Controlled Shutdown o Thermal-Overload and Short-Circuit Protection o Preset Output Voltages (0.75V to 3.0V) o Tiny 6-Pin Thin SOT23 Package (.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
MAX1963A 300mA LDO Regulators Maxim Integrated
MAX1960 1MHz PWM Step-Down Controllers Maxim Integrated Products
MAX1961 1MHz PWM Step-Down Controllers Maxim Integrated Products
MAX1962 1MHz PWM Step-Down Controllers Maxim Integrated Products
MAX1964 Tracking/Sequencing Triple/Quintuple Power-Supply Controllers Maxim Integrated Products

Other Datasheets by Maxim Integrated (Analog Devices)

Part Number Description
MAX196 Multirange / Single %V / 12-Bit DAS with 12-Bit Bus Interface
MAX1966 Low-Cost Voltage-Mode PWM Step-Down Controllers
MAX1968 Power Drivers for Peltier TEC Modules
MAX1969 Power Drivers for Peltier TEC Modules
MAX190 Low-Power / 12-Bit Sampling ADCs

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
19-3040; Rev 0; 10/03 Low-Input-Voltage, 300mA LDO Regulators with RESET in SOT and TDFN General Description The MAX1963/MAX1976 low-dropout linear regulators operate from a +1.62V to +3.6V supply and deliver a guaranteed 300mA continuous load current with a low 100mV dropout. The high-accuracy (±0.5%) output voltage is preset to an internally trimmed voltage in the +0.75V to +3.0V range. An active-low, open-drain reset output remains asserted for at least 2.2ms (MAX1963) or 70ms (MAX1976) after the output voltage reaches regulation. These devices are offered in 6-pin thin SOT23 and 6-pin 3mm x 3mm thin DFN packages.
Published: |