Datasheet4U Logo Datasheet4U.com

MAX11358B - 16-Bit Data-Acquisition System

Description

The MAX11358B smart data-acquisition system (DAS) is based on a 16-bit, sigma-delta analog-to-digital converter (ADC) and system-support functionality for a microprocessor (µP)-based system.

Features

  • +1.8V to +3.6V Single-Supply Operation.
  • Multichannel, 16-Bit, Sigma-Delta ADC 10sps to 477sps Programmable Conversion Rate Self- and System Offset and Gain Calibration PGA with Gains of 1, 2, 4, or 8 Unipolar and Bipolar Modes 10-Input Differential Multiplexer.
  • 10-Bit Force-Sense DACs.
  • Uncommitted Op Amps.
  • Dual SPDT and SPST Analog Switches.
  • Selectable References 1.25V, 2.048V, and 2.5V.
  • Internal Charge Pump.
  • System Support.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
MAX1135 3.3V Single Supply Maxim Integrated
MAX11359A Data-Acquisition System Maxim Integrated Products
MAX11311 12-Port Programmable Mixed-Signal I/O Maxim Integrated
MAX11312 12-Port Programmable Mixed-Signal I/O Maxim Integrated
MAX11321 4-/8-/16-Channel ADCs Maxim Integrated

Other Datasheets by Maxim Integrated (Analog Devices)

Part Number Description
MAX113 +3V / 400ksps / 4/8-Channel / 8-Bit ADCs
MAX11300 20-Port Programmable Mixed-Signal I/O
MAX11301 20-Port Programmable Mixed-Signal I/O
MAX1132 16-Bit ADC / 200ksps / 5V Single-Supply
MAX1133 16-Bit ADC / 200ksps / 5V Single-Supply

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
19-5027; Rev 0; 12/09 16-Bit Data-Acquisition System with ADC, DAC, UPIOs, RTC, Voltage Monitors, and Temp Sensor General Description The MAX11358B smart data-acquisition system (DAS) is based on a 16-bit, sigma-delta analog-to-digital converter (ADC) and system-support functionality for a microprocessor (µP)-based system. These devices integrate an ADC, DACs, operational amplifiers, internal selectable-voltage reference, temperature sensors, analog switches, a 32kHz oscillator, a real-time clock (RTC) with alarm, a high-frequency-locked loop (FLL) clock, four user-programmable I/Os, an interrupt generator, and 1.8V and 2.7V voltage monitors in a single chip. The MAX11358B has dual 10:1 differential input multiplexers (muxes) that accept signal levels from 0 to AVDD.
Published: |