Datasheet4U Logo Datasheet4U.com

MAX105 - Dual / 6-Bit / 800Msps ADC with On-Chip / Wideband Input Amplifier

Description

The MAX105 is a dual, 6-bit, analog-to-digital converter (ADC) designed to allow fast and precise digitizing of in-phase (I) and quadrature (Q) baseband signals.

Features

  • MAX105 Ordering Information PART MAX105ECS TEMP. RANGE -40°C to +85°C PIN-.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
MAX1057 Multichannel ADCs/DACs Maxim Integrated
MAX1058 Multichannel ADCs/DACs Maxim Integrated
MAX1020 Multichannel ADCs/DACs Maxim Integrated
MAX1022 Multichannel ADCs/DACs Maxim Integrated
MAX1026 10-Bit 300ksps ADCs Maxim Integrated Products

Other Datasheets by Maxim Integrated (Analog Devices)

Part Number Description
MAX100 250Msps / 8-Bit ADC with Track/Hold
MAX1002 Low-Power / 60Msps / Dual / 6-Bit ADC
MAX1003 Low-Power / 90Msps / Dual 6-Bit ADC
MAX1005 IF Undersampler
MAX1007 Mobile-Radio Analog Controller

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
19-2006; Rev 0; 5/01 Dual, 6-Bit, 800Msps ADC with On-Chip, Wideband Input Amplifier General Description The MAX105 is a dual, 6-bit, analog-to-digital converter (ADC) designed to allow fast and precise digitizing of in-phase (I) and quadrature (Q) baseband signals. The MAX105 converts the analog signals of both I and Q components to digital outputs at 800Msps while achieving a signal-to-noise ratio (SNR) of typically 37dB with an input frequency of 200MHz, and an integral nonlinearity (INL) and differential nonlinearity (DNL) of ±0.25 LSB. The MAX105 analog input preamplifiers feature a 400MHz, -0.5dB, and a 1.5GHz, -3dB analog input bandwidth. Matching channel-to-channel performance is typically 0.04dB gain, 0.1LSB offset, and 0.2 degrees phase. Dynamic performance is 36.
Published: |