DS1086 Datasheet | Maxim Integrated

Description The DS1086 Econ Oscillator™ is a programmable clock generator that produces a spread-spectrum (dithered) square-wave output of frequencies from 260k Hz to 133MHz. The selectable dithered output reduces radiated-emission peaks by dithering the frequency 2% or 4% below the programmed frequency. The DS1086 has a power-down mode and an output-enable control for power-sensitive applications. All the device settings are stored in nonvolatile (NV) EEPROM memory allowing it to operate in stand-alone applications. Applications Printers Copiers PCs puter Peripherals Cell Phones Cable Modems Features o User-Programmable Square-Wave Generator o Frequencies Programmable from 260k Hz to 133MHz o 2% or 4% Selectable Dithered Output o Glitchless Output-Enable Control o 2-Wire Serial Interface o Nonvolatile Settings o 5V Supply o No External Timing ponents Required o Power-Down Mode o 10k Hz Master Frequency Step Size o EMI Reduction Ordering Information PART TEMP RANGE PIN-PACKAGE DS1086U 0°C to +70°C 8 µSOP DS1086U+ 0°C to +70°C 8 µSOP DS1086Z 0°C to +70°C 8 SO DS1086Z+ 0°C to +70°C 8 SO Note: Contact the factory for custom settings. +Denotes a lead(Pb)-free/Ro HS-pliant package. Typical Operating Circuit Pin Configuration MICROPROCESSOR DITHERED 260k Hz TO 133MHz OUTPUT XTL1/OSC1 VCC OUT XTL2/OSC2 N.C. SPRD SCL- SDA- PDN DECOUPLING CAPACITORS (0.1µF and 0.01µF) - SDA AND SCL CAN BE CONNECTED DIRECTLY HIGH IF THE DS1086 NEVER NEEDS TO BE PROGRAMMED IN-CIRCUIT, INCLUDING DURING PRODUCTION TESTING. TOP...