Datasheet4U Logo Datasheet4U.com

XR3160E - RS-232/RS-485/RS-422 TRANSCEIVER

Description

The XR3160 is an advanced multiprotocol transceiver supporting RS-232, RS-485, and RS-422 serial standards.

Full operation requires only four external charge pump capacitors.

The RS-485/RS-232 pin selects RS-485 mode when high and RS-232 mode when low.

Features

  • Pin Compatible Upgrade for MAX3160 (20 SSOP).
  • IEC Level 4 ESD Protection.
  • ±15kV IEC 61000-4-2 Air Gap Discharge.
  • ± 8kV IEC 61000-4-2 Contact Discharge.
  • ±15kV Human Body Model (HBM).
  • 20Mbps RS-485 and 1Mbps RS-232 Data Rates.
  • Pin-Selectable 250kbps Slew Limiting.
  • Single Supply Operation from +3V to +5.5V.
  • 2 Drivers, 2 Receivers RS-232/V.28.
  • 1 Driver, 1 Receiver RS-485/422.
  • Full or Half Duplex Configuration.
  • 1/8th Unit Load, up to 256 re.

📥 Download Datasheet

Datasheet Details

Part number XR3160E
Manufacturer MaxLinear
File Size 1.01 MB
Description RS-232/RS-485/RS-422 TRANSCEIVER
Datasheet download datasheet XR3160E Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
XR3160E RS-232/RS-485/RS-422 TRANSCEIVER Exar
XR3161 Step-Up Converter XySemi
XR3162 Step-Up Converter XySemi
XR3170E 3.3V HIGH SPEED RS-485/RS-422 TRANSCEIVERS Exar
XR3171E 3.3V HIGH SPEED RS-485/RS-422 TRANSCEIVERS Exar

Other Datasheets by MaxLinear

Part Number Description
XR31233 CAN Bus Transceivers
XR31234 CAN Bus Transceivers
XR31235 CAN Bus Transceivers
XR32220 2-Driver/2-Receiver Intelligent RS-232 Transceiver
XR32330 3-Driver/3-Receiver Intelligent RS-232 Transceiver

Full PDF Text Transcription

Click to expand full text
XR3160E RS-232/RS-485/RS-422 TRANSCEIVER WITH 15KV ESD PROTECTION Jan 2018 Rev. 1.0.1 GENERAL DESCRIPTION The XR3160 is an advanced multiprotocol transceiver supporting RS-232, RS-485, and RS-422 serial standards. Full operation requires only four external charge pump capacitors. The RS-485/RS-232 pin selects RS-485 mode when high and RS-232 mode when low. The HALF/FULL pin configures the RS-485 modes as either half or full duplex. The high speed drivers operate up to 20Mbps in RS485/422 modes, and up to 1Mbps in RS-232 mode. All drivers can be slew limited to 250kbps in any mode to minimize electromagnetic interference (EMI) by setting the dedicated SLEW pin low.
Published: |