Datasheet4U Logo Datasheet4U.com

SP335E - RS-232/RS-485/RS-422 TRANSCEIVER

Description

The SP335 is an advanced multiprotocol transceiver supporting RS-232, RS-485, and RS-422 serial standards.

Integrated cable termination and multiple configuration modes allow all three protocols to be used interchangeably over a single cable or connector with no additional switching components.

Features

  • Pin-Selectable Cable Termination.
  • No External Resistors Required for RS-485/422 Termination or Biasing.
  • Robust ESD Protection:.
  • ±15kV IEC 61000-4-2 Air Gap Discharge.
  • ± 8kV IEC 61000-4-2 Contact Discharge.
  • ±15kV Human Body Model (HBM).
  • 20Mbps RS-485 and 1Mbps RS-232 Data Rates.
  • Pin-Selectable 250kbps Slew Limiting.
  • Single Supply Operation from 3V to 5.5V.
  • 1.65V to 5.5V Logic Interface VL pin.
  • 2 Drivers, 2 Receivers RS-232/V.28.
  • 1 Drive.

📥 Download Datasheet

Datasheet Details

Part number SP335E
Manufacturer MaxLinear
File Size 1.03 MB
Description RS-232/RS-485/RS-422 TRANSCEIVER
Datasheet download datasheet SP335E Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
SP335E RS-232/RS-485/RS-422 TRANSCEIVER EXAR
SP3304NUTG 4-Line 3.3V ESD Protection Diode Array Leiditech
SP330E RS-232/RS-485/RS-422 TRANSCEIVER EXAR
SP331 Programmable Dual RS-232/RS-485 Transceiver EXAR
SP331 Programmable RS-232/RS-485 Transceiver Sipex

Other Datasheets by MaxLinear

Part Number Description
SP330E RS-232/RS-485/RS-422 TRANSCEIVER
SP331 Programmable Dual RS-232/RS-485 Transceiver
SP332 RS-232/RS-485 Transceiver
SP334 Programmable RS-232/RS-485 Transceiver
SP336E 3.3V / 5V PROGRAMMABLE RS-232/RS-485/RS-422 SERIAL TRANSCEIVER

Full PDF Text Transcription

Click to expand full text
SP335E RS-232/RS-485/RS-422 TRANSCEIVER WITH INTERNAL TERMINATION August 2017 GENERAL DESCRIPTION The SP335 is an advanced multiprotocol transceiver supporting RS-232, RS-485, and RS-422 serial standards. Integrated cable termination and multiple configuration modes allow all three protocols to be used interchangeably over a single cable or connector with no additional switching components. Full operation requires only four external charge pump capacitors. The RS-485/RS-232 mode pin selects RS-485 mode when high, and RS-232 mode when low. In RS-485 mode, the TERM pin enables the differential 120 termination, and the HALF/FULL pin configures the transceiver as either half or full duplex. The high speed drivers operate up to 20Mbps in RS485/422 modes, and up to 1Mbps in RS-232 mode.
Published: |