Datasheet4U Logo Datasheet4U.com

SP334 - Programmable RS-232/RS-485 Transceiver

Description

The SP334 is a programmable RS-232 and/or RS-485 transceiver IC.

The SP334 contains three drivers and five receivers when selected in RS-232 mode; and two drivers and two receivers when selected in RS-485 mode.

Features

  • +5V Single Supply Operation.
  • Software Programmable RS-232 or RS-485 Selection.
  • Three RS-232 Drivers and Five Receivers in RS-232 Mode.
  • Two RS-485 Full-Duplex Transceivers in RS-485 Mode.
  • Full Differential Driver Tri-State (Hi-Z) Control.
  • Receiver Output Tri-State Control Ordering Information - Back Page Typical.

📥 Download Datasheet

Datasheet Details

Part number SP334
Manufacturer MaxLinear
File Size 330.63 KB
Description Programmable RS-232/RS-485 Transceiver
Datasheet download datasheet SP334 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
SP334 Programmable RS-232/RS-485 Transceiver EXAR
SP334 Programmable RS-232/RS-485 Transceiver Sipex
SP334A (SP3xxA) LOGIC GATE Signetics
SP3304NUTG 4-Line 3.3V ESD Protection Diode Array Leiditech
SP330E RS-232/RS-485/RS-422 TRANSCEIVER EXAR

Other Datasheets by MaxLinear

Part Number Description
SP330E RS-232/RS-485/RS-422 TRANSCEIVER
SP331 Programmable Dual RS-232/RS-485 Transceiver
SP332 RS-232/RS-485 Transceiver
SP335E RS-232/RS-485/RS-422 TRANSCEIVER
SP336E 3.3V / 5V PROGRAMMABLE RS-232/RS-485/RS-422 SERIAL TRANSCEIVER

Full PDF Text Transcription

Click to expand full text
SP334 Programmable RS-232/RS-485 Transceiver Description The SP334 is a programmable RS-232 and/or RS-485 transceiver IC. The SP334 contains three drivers and five receivers when selected in RS-232 mode; and two drivers and two receivers when selected in RS-485 mode. The RS-232 transceivers can typically operate at 230kbps while adhering to the RS-232 specifications. The RS-485 transceivers can operate up to 10Mbps while adhering to the RS-485 specifications. The RS-485 drivers can be disabled (High-Z output) by the TXEN enable pin. The RS-232 and RS-485 receiver outputs can be disabled by the RXEN pin.
Published: |