Datasheet4U Logo Datasheet4U.com

MxL7704-B - Five Output Universal PMIC

Description

The MxL7704-B is a five output Universal PMIC optimized for powering low power FPGAs, DSPs, and microprocessors from 5V inputs.

Four synchronous step down buck regulators range from 1.5A system power to 4A core power.

A 100mA LDO provides a clean 3.3V power for auxiliary devices.

Features

  • include input undervoltage lockout, overcurrent protection, and thermal protection. The MxL7704-B is offered in a 5mm x 5mm QFN package. Features.
  • Input voltage range from 4.0V to 5.5V.
  • Four synchronous buck regulators  Internally compensated current mode  From 1MHz to 2.1MHz switching frequency  Buck 1: 3.0V-3.6V, 20mV step, 1.5A  Buck 2: 1.3V-1.92V, 20mV step, 1.5A  Buck 3: 0.8V-1.6V, 6.25mV step, 2.5A  Buck 4: 0.6V-1.4V, 6.25mV step, 4A.
  • 100mA LDO 3.3V.
  • ±2% ma.

📥 Download Datasheet

Datasheet preview – MxL7704-B

Datasheet Details

Part number MxL7704-B
Manufacturer MaxLinear
File Size 1.34 MB
Description Five Output Universal PMIC
Datasheet download datasheet MxL7704-B Datasheet
Additional preview pages of the MxL7704-B datasheet.
Other Datasheets by MaxLinear

Full PDF Text Transcription

Click to expand full text
MxL7704-B Data Sheet Five Output Universal PMIC General Description The MxL7704-B is a five output Universal PMIC optimized for powering low power FPGAs, DSPs, and microprocessors from 5V inputs. Four synchronous step down buck regulators range from 1.5A system power to 4A core power. A 100mA LDO provides a clean 3.3V power for auxiliary devices. All of the outputs support ±10% margining. The two highest power outputs also support dynamic voltage control which saves power in processors that can use this function. You can monitor an input voltage flag and PGOOD flags for each output through a 400kHz I2C interface. The I2C port can enable you to modify the power up and down sequencing options, assign PGOOD outputs to the PGOOD pins, enable outputs, and select switching frequency.
Published: |