MP6619L
MP6619L is H-Bridge Motor Driver manufactured by Monolithic Power Systems.
DESCRIPTION
The MP6619L is an H-bridge motor driver. It operates from a supply input voltage (VIN) up to 28V and delivers a motor current up to 5A. The MP6619L is ideally suited to drive a brushed DC motor.
The MP6619L also has a configurable current limit. Full protection Features include overcurrent protection (OCP), VIN over-voltage protection (OVP), VCC under-voltage lockout (UVLO), and thermal shutdown.
The MP6619L is available in a QFN-19 (3mmx3mm) package.
2.5V to 28V, 5A H-Bridge Motor Driver
Features
- Wide 2.5V to 28V Operating Input Voltage (VIN) Range
- Up to 5A Peak Output Current (IOUT)
- pliance with 3.3V and 5V Systems
- Internal H-Bridge Driver
- Configurable Current Limit
- 65mΩ On Resistance (RDS(ON)) for Each Half-Bridge MOSFET with 5V VCC
- 100% Duty Cycle Operation of H-Bridge
- 1μA Shutdown Mode
- Over-Current Protection (OCP)
- VIN Over-Voltage Protection (OVP)
- VCC Under-Voltage Lockout (UVLO)
- Over-Temperature (OT) Shutdown
- Fault Indication Output
- Available in a QFN-19 (3mmx3mm)
Package
APPLICATIONS
- DC Motors
- Solenoids and Actuators
All MPS parts are lead-free, halogen-free, and adhere to the Ro HS directive. For MPS green status, please visit the MPS website under Quality Assurance. “MPS”, the MPS logo, and “Simple, Easy Solutions” are trademarks of Monolithic Power Systems, Inc. or its subsidiaries.
TYPICAL APPLICATION
2.5V to 28V C1
GND or Float 3.3V or...
