MP6614 Overview
The MP6614 is an H-bridge motor driver designed to drive reversible motors. The device can drive one DC motor, one winding of a stepper motor, or other loads. The H-bridge integrates four N-channel power MOSFETs, and an internal charge pump generates the required gate driver voltages.
MP6614 Key Features
- Wide 5V to 35V Operating Input Voltage (VIN) Range
- Internal Full H-Bridge Driver Supports 100% Duty Cycle
- 2A Continuous Output Current (IOUT)
- Low On Resistance (RDS(ON)) per MOSFET
- Simple, Versatile Logic Interfaces
- 3.3V and 5V patible Logic Supply
- Cycle-by-Cycle Current Regulation and Limiting
- Low Standby Circuit Current
- Over-Current Protection (OCP)
- Thermal Shutdown